34
English
DVD player
After pressing DVD or DVD MULTI, you can perform the following
operations on a DVD player:
3
:
Starts playing.
4
:
Returns to the beginning of the current (or previous) track.
¢
:
Skips to the beginning of the next track.
7
:
Stops playing.
8
:
Stops playing temporarily. To release it, press
3
.
After pressing DVD or DVD MULTI, these buttons can be used
for the DVD menu operations.
Note:
For detailed menu operations, refer to the instructions supplied
with the discs or the DVD player.
TV
You can always perform the following operations:
TV
:
Turns on or off the TV.
TV VOL. +/–
: Adjusts the volume.
TV/VIDEO
:
Sets the input mode (either TV or VIDEO).
TV CH +/–
:
Changes the channels.
After pressing TV SOUND, you can perform the following
operations on a TV:
1 – 9, 0, 100+
: Selects the channels.
RETURN
:
Alternates between the previously selected channel
and the current channel.
2
6
5
4
9
8
7/P
10
TEST
EFFECT
–
– REAR•L +
ENTER
RETURN
MENU
– REAR•R +
Cassette deck
After pressing TAPE/MD, you can perform the following operations
on a cassette deck:
3
:
Starts playing.
1
1
1
1
1
:
Fast winds the tape from right to left.
¡
¡
¡
¡
¡
:
Fast winds the tape from left to right.
7
:
Stops operations.
8
:
Pauses playing. To release it, press
3
.
REC PAUSE
: Pauses recording temporarily. To release it, press
3
.
Note:
To operate the cassette deck or MD recorder using the COMPU LINK
remote control system, set the source name correctly. (See page 11.)
MD recorder
After pressing TAPE/MD, you can perform the following operations
on the MD recorder:
3
:
Starts playing.
4
:
Returns to the beginning of the current (or previous)
track.
¢
:
Skips to the beginning of the next track.
7
:
Stops playing.
8
:
Pauses playing. To release it, press
3
.
REC PAUSE
: Pauses recording temporarily. To release it, press
3
.
Note:
To operate the cassette deck or MD recorder using the COMPU LINK
remote control system, set the source name correctly. (See page 11.)
IMPORTANT:
To operate JVC’s video components using this remote control:
• Aim the remote control directly at the remote sensor on the VCR,
DVD player or TV, not on the receiver.
• Some JVC VCRs can accept two types of the control signals —
remote code “A” and “B.” Before using this remote control, make
sure that the remote control code of the VCR connected to the
VCR jacks is set to code “A.”
VCR
You can always perform the following operations:
VCR
:
Turns on or off the VCR.
VCR CH +/–
:
Changes the channels on the VCR.
After pressing VCR, you can perform the following operations on
the VCR:
3
:
Starts playing.
1
:
Rewinds a tape.
¡
:
Fast winds a tape.
7
:
Stops operations.
8
:
Pauses playing. To release it, press
3
.
REC PAUSE
: Pauses recording temporarily. To release it, press
3
.
EN23_36.RX-668R[E]/2
99.1.28, 1:12 PM
34
