26
Setting the recording timer
You can set the recording timer for FM stations
or an external device.
NOTE
• Set the clock before setting the recording
timer (page 10).
• Check the reception of the FM station
and the connection of the external device
before setting the recording timer.
• Preset the desired FM station before setting
the recording timer (page 12).
• Connect the USB device to the unit before
setting the recording timer.
• The recording timer does not work when
the power is supplied through the batteries.
Supply the power through an AC outlet.
1. Press
CLOCK/TIMER.
The “REC TMR” appears on the display
window.
REC TMR
2. Press CLOCK/TIMER again.
ONAM12:00
3. Press UP or DOWN to adjust the hour of
the starting time.
• When you press and hold the button,
the hour digit changes continuously.
4. Press
SET.
5. Repeat 3 and 4 to adjust the minute of
the starting time, the hour and minute
of the finish time, and select the source
and the volume.
• When FM tuner is selected as the source,
select a preset number using UP or
DOWN and then press SET.
6. Press to turn off the System.
• The recording timer works only when
the System is turned off.
• While the timer is set, the timer indicator
lights up.
• While the timer is working,
flashes.
• The recording timer works only once.
(However, the settings are stored on the
System.)
• You can not set the same time for the
starting time and finish time.
To go back to the previous step,
press CANCEL.
To cancel the recording timer
, press CANCEL
after performing step 1.
To set the recording timer using the same
setting again,
press SET
after performing step 1.
Using the timer
RV-NB90̲J.indd 26
RV-NB90̲J.indd 26
12.4.16 2:08:19 PM
12.4.16 2:08:19 PM
