IT
ALIANO
ESP
AÑOL
FRANÇAIS
DEUTSCH
ENGLISH
E-13
White paint adjustment
To adjust the white balance more precisely by
varying the
B
and
R
channel’s gain after auto
white balance has been executed.
1.
Set the white balance mode to
A
AUTO1
B
or
A
AUTO2
B
. (
A
WHITE BALANCE MODE
SETTING
B
(
A
pg. 11))
2.
Set the mode to
A
PNT ON
B
with
FUNC1
button
C
. (
W.PAINT LED
lights.)
●
If
A
PNT OFF
B
is selected, the white balance is
set to the value obtained by the auto white
balance adjustment, (In this case, controls
have no effect.)
3.
Vary the
B
or
R
channel level with the
WHITE
PAINT
control
L
to adjust the white balance as
desired.
NOTE:
If auto white balance is executed with
A
PNT ON
B
selected and the procedure is
completed properly or fails as
A
OBJECT ERROR
B
,
the setting will automatically switch to
A
PNT OFF
B
and the
B
or
R
channel level will be restored to the
center position value.
Manual white balance adjustment
To adjust the white balance manually by varying
the
B
or
R
channel’s gain.
1.
Set the white balance mode to
A
MANUAL
B
.
2.
Vary the
B
and
R
channel levels with the
WHITE PAINT
controls
L
to adjust the white
balance as desired.
NOTE:
Function of
WHITE PAINT
controls
L
The last-set
WHITE PAINT
level can be stored,
allowing you to obtain the same level as last used
even if the control’s position has been changed.
However, once the control is turned, the memory
is canceled and the level changes to correspond
to the control's position.
o
GAIN (SENSITIVITY) SETTING
●
To select the camera’s sensitivity.
Available setting variations
The following 3 settings are possible.
dB mode, ALC + EEI, ALC.
1.
Press
GAIN
button
H
.
●
The LCD shows
A
GAIN
B
with current setting.
2.
Set the gain mode with
FUNC2
button
D
.
●
Each time is pressed, the mode changes
from dB mode
N
ALC + EEI
N
ALC
N
dB mode
N
... ; pressing changes the
modes in reverse order.
●
In the
A
dB mode
B
, the current gain setting is
indicated to the left.
●
If any mode other than
A
0 dB
B
is set, the
GAIN
LED
lights.
●
When gain mode is set to
A
ALC + EEI
B
or
A
ALC
B
, setting of iris mode using
ALC IRIS
SET
is possible. (
A
pg. 18,
A
REMOTE
CONTROLLER OPERATION MODE
SETTINGS
B
)
3.
In the
A
dB mode
B
, select the dB value using
FUNC1
button
C
.
●
Each time is pressed, the mode changes from
–3 dB
N
0 dB
N
+3dB
N
+6dB
N
+9dB
N
+12dB
N
+15dB
N
+18dB
N
LOLUX; pressing
changes the modes in reverse order.
●
If any mode other than
A
0 dB
B
is set, the
GAIN
LED
lights.
●
The dB value that is not compatible with the
camera will not be displayed.
NOTE:
When the random trigger mode is set to ON,
A
ALC
+ EEI
B
mode is not available.
To engage the
A
ALC + EEI
B
mode, first release the
random trigger mode, then reset as necessary.
FUNC1
WHITE BALANCE
PNT ON AUTO1
Selects
A
PNT ON
B
.
WHITE BALANCE
MANUAL
GAIN
GAIN
0dB dB mode
Press
GAIN
button.
FUNC2
Selects the mode.
GAIN
0dB dB mode
FUNC1 FUNC2
Selects the gain.
RM-LP55_U_E.book Page 13 Monday, July 25, 2005 2:57 PM
