JVC PD-42DX, Service Manual

Page: 4 / 48

PD-42DX
1-4 (No.52088)
1.2 INSTALLATION
1.2.1 HEAT DISSIPATION
If the heat dissipation vent behind this unit is blocked, cooling
efficiency may deteriorate and temperature inside the unit will
rise. The temperature sensor that protects the unit will be
activated when internal temperature exceeds the pre-determined
level and power will be turned off automatically.
Therefore, please make sure pay attention not to block the heat
dissipation vent as well as the ventilation outlet behind the unit
and ensure that there is room for ventilation around it.
1.2.2 INSTALLATION REQUIREMENTS
Ensure that the minimal distance is maintained, as specified
below, between the unit with and the surrounding walls, as well
as the floor etc.
Install the unit on stable flooring or stands.
Take precautionary measures to prevent the unit from tipping in
order to protect against accidents and earthquakes.
1.2.3 FALL TIP PREVENTION MEASURES
Take precautionary measures to prevent the unit from falling or
tipping to protect against emergencies such as earthquakes as
well as accidents.
Fasten the supplied hook for tip fall prevention using the screws,
also supplied, behind the display unit, and use them together
with durable cords (to be purchased separately) to secure the
unit to a robust part such as the wall surface or pillars.
150mm or more
200mm or more
150mm
or more
200mm
or more
50mm or more
SPACE REQUIRED FOR INSTALLATION OF THE DISPLAY UNIT
100mm or more 100mm or more
100mm or more
100mm or more
100mm or more
SPACE REQUIRED FOR INSTALLATION OF THE RECEIVER UNIT
MENU
OK
P
TV/VIDE
The supplied hook for tipfall prevention