60
EN
T
W
EDITING
(Cont.)
Random Assemble Editing
Using the RM-V708U or RM-V710U remote control, you can use P.AE/Effects and make an original edited
tape.
1
MAKE CONNECTIONS
Connect the Docking Station to your VCR and
make sure that the playback picture and sound
are available on the connected TV (
Z
pg. 52).
2
START SOURCE PLAYBACK
(IF NECESSARY)
First turn the Power Dial to "PLAY". Press PLAY
and then press R.A. EDIT ON/OFF on the
remote control. Make sure to point the remote
control at the Docking Station's sensor.
• The Random Assemble Editing Menu appears
on the TV screen.
3
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE.
• Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
• You can’t use a Picture Wipe/Dissolve at the
beginning of Program 1, or at the end of the
last scene.
Source tape (Camcorder)
Yellow
White
Red
Red
White
Yellow
Editing cable
New tape (VCR)
NOTES:
●
When using a JVC VCR with a remote pause
terminal, connect the editing jack on the Docking
Station to the VCR’s remote pause terminal using
an editing cable.
●
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the
Docking Station's editing jack to the remote
control's remote pause terminal using an editing
cable.
●
If the VCR has an S-Video input terminal, connect
it using an S-Video cable.
●
If the VCR has only one audio input terminal,
connect it using a conversion plug (not provided).
●
When using the provided cable, make sure you
connect the end of the cable with the core filter to
the Docking Station.
●
Set the VIDEO OUT select switch of connector as
required: either to “CVBS” (with the direct VCR
connection) or to “Y/C” (with the RGB converter
connection).
To Operate The VCR With The Remote Control . . .
..... press and hold SHIFT, then press the
appropriate control button.
To AUDIO input jacks (L/R)
VCR
(Recording deck)
To remote pause jack
To EDIT jack
Core filter
To S-VIDEO output jack
To VIDEO output jack
S-VIDEO cable
To AUDIO output
jacks (L/R)
AUDIO/
VIDEO cables
RM-V708U or
RM-V710U
VIDEO OUT
select switch
(Y/C or CVBS)
To VIDEO
input jack
To S-VIDEO
input jack
Cable adapter (provided)
If your VCR has the 21-pin
AV input connector
(SCART), use the provided
cable adapter.
