EN
27
1
ENABLE SNAPSHOT SEARCH
Set the Power Dial to “PLAY”.
2
REWIND TAPE
Press REW. Let the tape rewind to the begin-
ning, where it stops automatically.
3
BEGIN SEARCH
Press SNAPSHOT. The camcorder begins
searching for the first scene recorded in
Snapshot mode or where the Strobe effect was
used.
•If the first scene on the tape was recorded in
Snapshot mode or with the Strobe effect, the
camcorder may not be able to locate the
exact beginning of the scene.
Snapshot Search could malfunction if the
recorded tape has:
•Too little time between Snap shots
•Blank space between recordings
•Snap shots taken using Motor Drive mode
To Stop A Snapshot Search In Progress . . .
..... press SNAPSHOT again.
NOTE:
By attaching the camcorder to the Docking Station
and connecting a video printer to the station, it is
possible to print out snapshots. (
Z
pg. 49).
Snapshot Search
The Snapshot Search function enables you to quickly and easily access scenes recorded in the Snapshot
mode, or scenes where Strobe (
Z
pg. 41) was used.
