JVC LVT1321-010C Instructions Manual Download Page 18

Page: 18 / 45

Basic adjustment of auto memory

This receiver memorizes sound settings for each source:
• when you turn off the power, and
• when you change the source.

When you change the source, the memorized settings for the
newly selected source are automatically recalled.
The following can be stored for each source:
• Analog/digital input mode (see page 14)
• Bass boost (see page 25)
• Digital equalization pattern (see page 24)
• Input attenuator mode (see page 25)
• Midnight mode (see page 21)
• Speaker output level (see page 24)
• Surround/DSP mode selection (see page 33)
• Volume level for each source when One Touch Operation is

set to “ONETOUCH

” (see page 22)

NOTE

If the source is FM or AM, you can assign a different setting
for each band.

Signal and speaker indicators on the display

Signal indicators

Speaker indicators

The signal indicators light up as follows:

•

When digital input is selected:

Lights up when the

left channel signal comes in.

•

When analog input is selected:

Always lights up.

•

When digital input is selected:

Lights up when the

right channel signal comes in.

•

When analog input is selected:

Always lights up.

Lights up when the center channel signal comes in.

LS:

Lights up when the left surround channel signal comes
in.

RS:

Lights up when the right surround channel signal comes
in.

Lights up when monaural surround signal comes in.

SB:

Lights up when the surround back channel signal
comes in.

LFE: Lights up when the LFE channel signal comes in.

NOTE

When “DVD MULTI” is selected as the source, all the signal
indicators except “SB,” “S,” and “LFE” light up.

The speaker indicators light up as follows:

• The subwoofer indicator (

S.WFR

) lights up when

“SUBWOOFER” is set to “SUBWFR

YES

.” For details,

see page 19.

• The other speaker indicators light up only when the

corresponding speaker is set to “SML (small)” or “LRG
(large),” and also when required for the current playback.

Changing the display brightness

You can dim the display—Dimmer.

From the remote control ONLY:

Press DIMMER repeatedly.

• Each time you press the button, the display brightness changes

as follows:

DIMMER 1:

Dims the display.

DIMMER 2:

Dims the display more than DIMMER 1.

DIMMER 3:

Turns off the display.
(Temporarily canceled when you operate the
receiver.)

DIMMER OFF: Cancels the Dimmer (normal display).

Turning off the power with the Sleep
Timer

You can fall asleep while listening to music—Sleep Timer.

From the remote control ONLY:

Press SLEEP repeatedly.

• Each time you press the button, the shut-off time changes in 10

minute intervals. The SLEEP indicator lights up on the display.

SLEEP indicator

When the shut-off time comes:

The receiver turns off automatically.

To check or change the remaining time until the shut-off
time:

Press SLEEP once.
The remaining time (in minutes) until the shut-off time appears.
• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer:

Press SLEEP repeatedly so that “SLEEP OFF” appears on the
display. (The SLEEP indicator goes off.)
• The Sleep Timer is also canceled when you turn off the

receiver.

Making sounds natural

JVC’s CC (Compression Compensative) Converter eliminates
jitter and ripples, achieving a drastic reduction in digital distortion
by processing the digital music data in 24 bit-quantization and by
expanding the sampling frequency to 176.4 kHz (for fs 44.1 kHz
signals)/192 kHz (for fs 48 kHz signals) on the front speakers.
By using the CC Converter, you can obtain a natural sound field
from both digital and analog sources.

Press CC CONVERTER repeatedly.

• Each time you press the button, the mode changes as follows:

CC CNVRTR 1:

Select when playing back an analog
source or a digital source with non
compressed digital sound signal (Linear
PCM).
The CC CONVERTER 1 indicator lights
up on the display.

CC CNVRTR 2:

Select when playing back a source with
compressed digital sound signal (Dolby
Digital or DTS).
The CC CONVERTER 2 indicator lights
up on the display.

CC CNVRTR OFF:

Select when not using the CC Converter.

LINEAR PCM

S.WFR

NEO : 6 DSP
3D-PHONIC

LFE

96 / 24

AUTO SURR

VIRTUAL SB

HEADPHONE