JVC LT-42WX70EU, Instructions Manual

Page: 38 / 68

20
Colour Matrix
Selects the colour matrix used for colour conversion.
●
The setting is fixed to “ Auto ” and unadjustable when “ Colour Space ” is set to
“ sRGB ”, “ AdobeRGB ”, or “ x.v.Colour ”.
●
The setting is fixed to “ Auto ” and unadjustable when ” PC Monitor Mode ” is
set to “ On ”.
●
The setting is fixed to “ Auto ” and unadjustable when “ Colour Space ” is set to
“ Auto ” and the xvYCC signal is input to the HDMI terminal.
■
Auto : An appropriate colour matrix is applied automatically.
■
709 : The colour matrix conforming ITU-R BT.709 is used for
conversion.
■
601 : The colour matrix conforming ITU-R BT.601 is used for
conversion.
Colour Space
Changes the range of colour representation.
●
“ sRGB ” or “ AdobeRGB ” is selectable when “ PC Monitor Mode ” is set to “ On ”.
●
Even when “ Auto ” is selected, the setting may not switch to “ x.v.Colour ”
automatically depending on the connected device or the connection status.
■
Auto : Normally applies “ Wide ”. When the xvYCC signal is input to the
HDMI terminal, “ x.v.Colour ” is applied automatically.
■
Normal : HDTV standard.
■
Wide : The wide colour gamut of the equipped LED panel. (Wider than
the HDTV standard.)
■
x.v.Colour : Colour representation suitable for x.v.Colour.
■
sRGB : Colour representation suitable for sRGB.
■
AdobeRGB : Colour representation suitable for AdobeRGB.
WX70̲inst̲eu.indb 20 WX70̲inst̲eu.indb 20 09.3.9 11:10:26 AM 09.3.9 11:10:26 AM