background image

3

Safety Warnings

•  Only use the screws supplied with the wall 

mount bracket when attaching the monitor 

to the bracket. See your monitor instructions 

for screw type.

•  Tighten the wall mount screw firmly to 

prevent the monitor from falling. Do not over 

tighten the screws.

•  If you are in any doubt how to mount your 

monitor, contact a professional.

Temperature
•  Avoid extreme degrees of temperature, 

either hot or cold. Place the unit well away 

from heat sources such as radiators or gas / 

electric fires.

•  Avoid exposure to direct sunlight and other 

sources of heat.

Naked Flames
•  Never place any type of candle or naked 

flame on the top of or near the unit.

Moisture
•  To reduce the risk of fire, electric shock or 

product damage, do not expose this unit 

to rain, moisture, dripping or splashing. No 

objects filled with liquids, such as vases, 

should be placed on the unit.

•  If you spill any liquid into the unit, it can 

cause serious damage. Switch it off at the 

mains immediately. Withdraw the mains plug 

and consult your dealer.

Ventilation
•  To prevent the risk of electric shock or fire 

hazard due to overheating, ensure that 

curtains and other materials do not obstruct 

the ventilation vents.

•  A minimum distance of 5 cm around the unit 

should be maintained to allow for sufficient 

ventilation.

•  Do not install or place this unit in a bookcase, 

built-in cabinet or in another confined space. 

Ensure the unit is well ventilated.

Safety
•  Always disconnect the unit from the mains 

supply before connecting / disconnecting 

other devices or moving the unit.

•  Unplug the unit from the mains socket 

during a lightning storm and long inactivity 

periods (going on holiday).

•  Read all the instructions carefully before 

using the unit and keep them for future 

reference.

•  Retain the manual. If you pass the unit onto a 

third party make sure to include this manual.

•  Check that the voltage marked on the rating 

label matches your mains voltage.

•  WARNING: Never let people (including 

children) with reduced physical, sensory or 

mental capabilities or lack of experience 

and / or knowledge use electrical devices 

unsupervised.

•  To avoid danger of suffocation, keep plastic 

bags out of reach of babies, children and 

domestic animals.

•  Carefully attach the stand to the monitor. If 

the stand is provided with screws, tighten 

the screws firmly to prevent the Monitor 

from tilting. Do not over tighten the screws 

and mount the stand rubbers properly.

Damage
•  Please inspect the unit for damage after 

unpacking.

•  Do not continue to operate the unit if you 

are in any doubt about it working normally, 

or if it is damaged in any way - switch off, 

withdraw the mains plug and consult your 

dealer.

Location of Unit
•  The unit must be placed on a flat stable 

surface and should not be subjected to 

vibrations.

•  Do not place the unit on sloped or unstable 

surfaces as the unit may fall off or tip over.

•  The mains socket must be located near the 

unit and should be easily accessible.

•  This unit is designed for indoor, domestic 

use only.

•  Use this monitor set at an altitude of less 

than 2000 meters above sea level, in dry 

locations and in regions with moderate or 

tropical climates.

Wall Mounting
•  Read the monitor and wall mount 

instructions before mounting your monitor 

on the wall. 

•  The wall mount bracket is not supplied, they 

can be purchased from your dealer.

•  Do not install the monitor on a ceiling or an 

inclined wall.

Summary of Contents for LT-27CM69B

























Reviews: