JVC LT-19DK8WJ Instructions Manual Download Page 55

Page: 55 / 56

Specifications

We may change the design and specifications without notice.

• Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any

commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent

of the owners of copyright of the original picture sources, as this would be an infringement of
copyright.

• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Model

LT-19DK8ZJ/LT-19DK8WJ

Broadcasting systems

B/G, D/K, I, L/L'

Colour systems

PAL, SECAM

• The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies

Analogue:

• UK: UHF (E21-E69)

• Ireland: UHF/VHF (IR A-J, E2-12,E21-E69) (47-862Hz)

Digital (DVB-T): E21-E68 (470-860Hz)

Sound-multiplex systems

• Analogue: A2 / Nicam / Dual1-2,

• Digital (DVB-T): MPEG-1 Layer1, Layer2, Dolby Digital

Teletext systems

• Analogue: FLOF (Fastext), TOP

• Digital: Digital Teletext (Mheg 5)

Power requirements

220 - 240 V AC, 50/60 Hz

Power consumption

Max. 63 W (Standby: 0.8 W)

Screen size

Viewable area 48 cm (measured diagonally)

Audio output

Rated Power output: 2 W + 2 W

Speakers

3.4 cm oval

EXT-1 terminal

Euroconnector (21-pin, SCART)

• Video input, Audio L/R inputs and RGB inputs are available.

• TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

RCA connectors

• Component video (Y, Pb, Pr) input and Audio L/R inputs are available.

• 480i(525i), 480p(525p), 576i(625i), 576p(625p), 720p(750p) and 1080i(1125i)

signals are available.

EXT-3 terminal

RCA connectors

S-VIDEO connector

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

EXT-4 terminal

HDMI connector

• 480i(525i), 480p(525p), 576i(625i), 576p(625p), 720p(750p) and 1080i(1125i)

signals are available.

AUDIO OUT terminal

RCA connectors

• Audio L/R outputs are available.

DIGITAL AUDIO OUT

terminal

TOSLINK connector

• Optical digital audio L/R outputs are available.

DVI AUDIO IN terminal

Stereo mini-jack (3.5 mm in diameter)

PC IN terminal

Analogue RGB D-SUB (15 pin)

Stereo mini-jack (3.5 mm in diameter)

• PC signal is available. Refer to page 47 for details of the signals which can be

input.

Headphone jack

Stereo mini-jack (3.5 mm in diameter)

Dimensions (W

449 mm

366 mm

178 mm

449 mm

331 mm

93 mm (without stand)

Weight

5.7 kg

5.2 kg (without stand)

Accessories

Remote control unit

1 (RM-C1899S)

AA/R6 dry cell battery

Ferrite core

Summary of Contents for LT-19DK8WJ

























































Search results

Summary of Contents for LT-19DK8WJ

Reviews:

Related manuals for LT-19DK8WJ

Brands by name

Popular brands

JVC LT-19DK8WJ, Instructions Manual

Search results

Summary of Contents for LT-19DK8WJ

Reviews:

Related manuals for LT-19DK8WJ

Brands by name

Popular brands