background image

E-35

English

Item

“SHADING”

“LEVEL(R)”

“LEVEL(G)”

“LEVEL(B)”

“PAGE BACK”

“WHITE BALANCE” Screen (continued)

Function/Variable Values

For setting whether to perform white shading adjustment.

“PRESET”

: White shading adjustment disabled.

“MANUAL”

: White shading adjustment enabled.

 Page 22 ‘White Shading Adjustment’

For adjusting reddishness of white shading only when the “SHADING” item is set
to “MANUAL”.
Increase value

: Decreases reddishness at lower end and increases

reddishness at upper end of screen.

Decrease value : Decreases reddishness at upper end and increases

reddishness at lower end of screen.

{Variable Values : –128 - 

- +127}

For adjusting greenishness of white shading only when the “SHADING” item is set
to “MANUAL”.
Increase value

: Decreases greenishness at lower end and increases

greenishness at upper end of screen.

Decrease value : Decreases greenishness at upper end and increases

greenishness at lower end of screen.

{Variable Values : –128 -  

0

 - +127}

For adjusting bluishness of white shading only when the “SHADING” item is set to
“MANUAL”.
Increase value

: Decreases bluishness at lower end and increases bluishness

at upper end of screen.

Decrease value : Decreases bluishness at upper end and increases bluishness

at lower end of screen.

{Variable Values : –128 - 

0

 - +127}

Press the [SET] button to return to the “MENU” screen when cursor is at this
position.

Settings in bold are factory settings

Note

Selection of “LEVEL(R)”, “LEVEL(G)” and “LEVEL(B)” items is disabled when the “SHADING” item is set to
“PRESET”. (Displayed as “- - - - - -”)

Summary of Contents for KY-F560

















































Reviews: