ENGLISH
38
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Part list for installation
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
terminal of the car battery.
2
Connect the wires properly.
See Wiring connection.
( 39)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the terminal of the car battery.
5
Press
to turn on the power.
6
Reset the unit. ( 3)
Use only the specified screws. Using wrong screws might damage
the unit.
INSTALLATION/CONNECTION
Installing the unit (in-dash mounting)
Install onto the car brackets using the supplied screws
(B)
or
(C)
. The screw holes differ depending on the model
of the cars.
Do the required wiring. (
39
)
Dashboard of your car
Car bracket
(A)
Wiring harness
(B)
Flat head screw M5 × 8 mm (M5 × 3/8")
(C)
Round head screw M5 × 8 mm (M5 × 3/8")
JS_JVC_KW_R935BTS_K_EN_7.indd 38
JS_JVC_KW_R935BTS_K_EN_7.indd 38
7/4/2017 2:45:59 PM
7/4/2017 2:45:59 PM