36
ENGLISH
Settings
Settings
<Steering Remote Controller>
Assign functions to the keys on the remote controller
of the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
1
Press and hold a steering remote
controller button for about 2 seconds to
register/change when the unit is ready for
learning.
2
Select a function to assign to the selected
button.
3
Repeat steps 1 and 2 to register other
functions to other buttons.
3
Rotate the image (
1
) if necessary, then
confirm the selection (
2
).
A confirmation message appears. Touch
[Enter]
to store the new image. (The existing image is
replaced with the new one.)
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
•
0
(Initial)/
–1
/
–2
/
–3
User interface settings
Display the <User Interface> screen.
On the Home screen, touch as follows:
Then, on the
<SET-UP>
screen, touch
[User
Interface]
.
Storing your favorite image for the
background
You can use your favorite image stored on the
connected USB device for the background.
• Connect the USB device on which the image is
stored beforehand.
• Use a JPEG/PNG/BMP file with a resolution of 800 x
480 pixels.
1
Touch [User1 Select] or [User2 Select] to
store the image for the <Background>
screen.
2
Select the folder, then the file for the
background image in the selected folder.
00_EN_KW_M450BT_M.indb 36
00_EN_KW_M450BT_M.indb 36
25/2/2019 1:42:57 PM
25/2/2019 1:42:57 PM
