JVC KV-MR9000 Instructions Manual Download | Manualshive

Page: 42 / 59

background image

2

ENGLISH

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.
CAUTION:

This monitor system should be used with DC 12V only.
To prevent electric shocks and fire hazards, DO NOT
use any other power source.

WARNINGS

• DO NOT INSTALL THE MONITOR IN A LOCATION WHICH

OBSTRUCTS DRIVING, VISIBILITY OR WHICH IS
PROHIBITED BY APPLICABLE LAWS AND
REGULATIONS.

• THERE MAY BE LEGAL REGULATIONS DEFINING THE

PERMISSIBLE INSTALLATION LOCATIONS FOR THE
DISPLAY UNIT WHICH DIFFER BY COUNTRY OR BY
STATE. BE SURE TO INSTALL THE DISPLAY UNIT IN A
CORRECT LOCATION ACCORDING TO SUCH LAWS.

• DO NOT INSTALL THE MONITOR IN A LOCATION WHICH

OBSTRUCTS THE OPERATION OF AN AIR BAG.

• THE DRIVER MUST NOT OPERATE THE MONITOR

SYSTEM WHILE DRIVING.
OPERATING THE MONITOR WHILE DRIVING MAY LEAD
TO CARELESSNESS AND CAUSE AN ACCIDENT.

* STOP YOUR VEHICLE IN A SAFE LOCATION WHEN

OPERATING THE MONITOR.

• THE DRIVER MUST NOT WATCH THE TELEVISION OR

VIDEOS WHILE DRIVING.
IF THE DRIVER WATCHES THE TELEVISION OR A VIDEO
WHILE DRIVING, IT MAY LEAD TO CARELESSNESS
AND CAUSE AN ACCIDENT.

• WHEN LIGHTNING OCCURS, DO NOT TOUCH THE

ANTENNA WIRE OR THE TELEVISION.
TOUCHING THE ANTENNA WIRE OR THE TELEVISION
UNDER SUCH CONDITIONS MAY CAUSE
ELECTROCUTION.

• KEEP THE MONITOR AT AN APPROPRIATE SOUND

LEVEL WHILE DRIVING.
DRIVING WITH THE SOUND AT A LEVEL THAT
PREVENTS YOU FROM HEARING SOUNDS OUTSIDE
OF AND AROUND THE VEHICLE MAY CAUSE AN
ACCIDENT.

• ASK A TRAINED TECHNICIAN TO INSTALL THE

MONITOR SYSTEM.
INSTALLATION AND WIRING REQUIRE TRAINING AND
EXPERIENCE.

* TO BE SAFE, ASK THE SALES OUTLET WHERE YOU

PURCHASED THE MONITOR SYSTEM TO PERFORM THE
INSTALLATION.

• BE SURE NOT TO LET THE MONITOR FALL OR BE

STRONGLY IMPACTED SINCE THIS MAY CAUSE A
MALFUNCTION OR FIRE.

• DO NOT USE THE MONITOR WITH THE ENGINE OFF.

WATCHING THE MONITOR WITH THE ENGINE OFF WILL
CONSUME BATTERY POWER AND MAY PREVENT THE
ENGINE FROM STARTING.

• DO NOT USE ANY CEILING LIGHT BULBS OTHER THAN

SPECIFIED FOR THIS UNIT (12 V, 3 W).
FAILING TO DO SO MAY POSSIBLY CAUSE FIRE.

•

WHEN NOT IN USE, CLOSE THE LIQUID CRYSTAL
PANEL AND STORE IT INTO THE COMPARTMENT.

Installation requires some special
knowledge.
Do not install the monitor system
yourself. Consult a dealer having
special knowledge of this kind for safe
and reliable installation.

EN02-07KV-MR9000[U]F.pm6

03.3.11, 11:54

2

«
...
40
41
42
43
44
...
»

Summary of Contents for KV-MR9000




























































Reviews:

No comments

Related manuals for KV-MR9000

Brand: HK Audio Pages: 20

Brand: Nakamichi Pages: 18

SKU 4670PE31GDT

Brand: Diamond Multimedia Pages: 1

Brand: MPMan Pages: 32

EVERPURE CONSERV LT-S

Brand: Pentair Pages: 20

Varixx UMS 4401 SPCD

Brand: Grundig Pages: 47

Brand: MNC Pages: 32

Brand: Daewoo Pages: 22

Brand: X4-TECH Pages: 2

Brand: RCA Pages: 2

Brand: RCA Pages: 16

Brand: Boss Audio Systems Pages: 2

Brand: Boss Audio Systems Pages: 4

Brand: Exibel Pages: 84

Brand: Phonocar Pages: 56

Brand: Honda Pages: 251

Brand: Gainward Pages: 2

Brand: Pioneer Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands