KS-FX925R
1-4
Prior to performing the following procedure, remove
the front chassis, the heat sink and bottom cover.
Remove the five screws
D
attaching the rear panel
and one screw
E
attaching the pine jack on the back
of the body.
1.
Removing the rear panel (See Fig.7 )
Remove the four screws
C
attaching the heat sink
on the left side of the body, and remove the heat
sink.
1.
Removing the heat sink (See Fig.6)
Prior to performing the following procedure, remove
the front chassis, the heat sink, bottom cover and the
rear panel.
Remove the two screws
F
attaching the main
amplifier board assembly on the top cover.
Disconnect connector CP401 on the main amplifier
board assembly from the cassette mechanism
assembly.
1.
2.
Removing the main amplifier board assembly
(See Fig.8)
Fig. 7
D
D
D
E
Rear panel
Heat sink
Fig. 6
C
C
C
Fig. 8
Main board assembly
CP401
F
F
