KS-FX925R
1-5
Prior to performing the following procedure, remove
the front chassis, the heat sink, bottom cover and the
main amplifier board assembly.
Remove the four screws
G
attaching the cassette
mechanism assembly from the top cover.
1.
Removing the cassette mechanism assembly
(See Fig.9)
Removing the (LCD & key) control switch
board (See Fig.10 to 12)
Prior to performing the following procedure, remove
the front panel assembly.
Remove the four screws
H
attaching the rear cover
on the back of the front panel assembly.
Unjoint the nine joints
f
with the front panel and the
rear cover.
Remove the control switch board on the back of the
front panel.
1.
2.
3.
Cassette mechanism assembly
G
G
Top cover
Fig. 9
H
H
H
H
Fig. 10
Fig. 12
Fig. 11
LCD & Key control board
G
G
Joint f
Joint f
Joint f
Joint f
Front panel
Rear cover
