Menu item
Selectable setting (Initial: [XX])
AUDIO
L/O MODE
(Line output
mode)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W
: Subwoofer
[REAR]
: Speakers
SUB. W
*5
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*6
(Subwoofer low-
pass filter)
LOW 55Hz
/
MID 85Hz
/
[HIGH 120Hz]
: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*6
(Subwoofer level)
00 — 08
[08]
: Adjusts the subwoofer output level.
HPF
*6
(High-pass filter)
LOW 100Hz
/
MID 120Hz
/
HIGH 150Hz
: Activates the High Pass Filter.
Audio signal with frequencies lower than 100 Hz/120 Hz/150 Hz are cut off
from the front/rear speakers.
[OFF]
: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
AMP GAIN
*7
(Amplifier gain)
LOW POWER
: VOLUME 00 — VOLUME 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the speakers.)
[HIGH POWER]
: VOLUME 00 — VOLUME 50
TUNER
SSM
For settings,
'
page 6. (Displayed only when the source is
“
FM
”
.)
MONO
(Monaural mode)
Displayed only when the source is
“
FM
”
.
[OFF]
: Enables stereo FM reception.
ON
: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings,
'
page 7.
*5
Displayed only when <L/O MODE> is set to <SUB.W>.
*6
Displayed only when <SUB.W> is set to <ON>.
*7
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER>
with the volume level set to higher than “VOLUME 30”.
Menu operations
ENGLISH
ޓ
|
21
2011/11/22
ޓ
19:27:26
KD-X50BT_U_EN
