Menu item
Selectable setting (Initial: [XX])
USB
*8
DRIVECHANGE
: Selects to change the drive when a device with multiple
drives is connected to the USB input terminal (front/rear).
IPOD SWITCH
*9
(iPod/iPhone control)
[HEAD MODE]
/
IPOD MODE
/
APP MODE
:
For settings,
'
page 9.
AUDIOBOOKS
*9
NORMAL
/
FASTER
/
SLOWER
: Selects the playback speed of the
Audiobooks sound file in your iPod/iPhone.
Initial selection depends on your iPod/iPhone setting.
BLUETOOTH
*10
PHONE
*11
CONNECT
/
DISCONNECT
: Connects or disconnects the Bluetooth phone/
audio device. (
'
page 12)
AUDIO
APPLICATION
CONNECT
/
DISCONNECT
: Connects or disconnects the application in the
smart phone. (
'
page 13)
DELETE PAIR
For settings,
'
page 13.
P. BOOK WAIT
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
SET PINCODE
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the control dial to select a number, press
/
to move to the entry
position. After entering the PIN code, press the control dial to confirm.
AUTO CNNCT
[ON]
: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
OFF
: Cancels.
INITIALIZE
YES
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
[NO]
: Cancels.
INFORMATION
PH CNNT DEV
/
AU CNNT DEV
/
APP CNT DEV
*12: Displays connected
phone/audio/application device name.
MY BT NAME
: Displays the unit name (JVC Unit).
MY ADDRESS
: Shows address of USB Bluetooth Adapter.
SRC SELECT
AM
*13
[ON]
/
OFF
: Enables or disables
“
AM
”
in source selection.
AUX IN
*13
[AUX ON]
/
AUX OFF
: Enables or disables
“
AUX IN
”
in source selection.
BT AUDIO
*14
[BT AU ON]
/
BT AU OFF
: Enables or disables
“
BT AUDIO
”
in source
selection.
SOFT VER
Displays the firmware version of the unit.
*8
Displayed only when the source is “USB FRONT/USB REAR”.
*9
Displayed only when the source is “IPOD-FRONT/IPOD-REAR”.
*10 If the USB Bluetooth Adapter is not connected to the unit, “PLEASE CNNT BT ADAPTER” scrolls
on the display.
*11 <CONNECT> will not be displayed if two Bluetooth phones are connected at the same time.
*12 Displayed only when a Bluetooth phone/audio player/application is connected.
*13 Displayed only when the unit is in any source other than the corresponding source “AM/AUX IN”.
*14 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is
not “BT FRONT/ BT REAR”.
Menu operations
22
|
ޓ
ENGLISH
2011/11/22
ޓ
19:27:26
KD-X50BT_U_EN
