6
ENGLISH
Set the basic settings
1
Press and hold
.
2
Perform ‘Select an item (page 3 or 4)’ operation to select an
item (see the following table).
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.)
[ON]
: Activates the keypress tone. ;
[OFF]
: Deactivates.
[SOURCE SELECT]
[AM SRC]
*
[ON]
: Enables AM in source selection. ;
[OFF]
: Disables. (Page 7)
[SW1 SRC]
*
[ON]
: Enables SW1 in source selection. ;
[OFF]
: Disables. (Page 7)
[SW2 SRC]
*
[ON]
: Enables SW2 in source selection. ;
[OFF]
: Disables. (Page 7)
[SPOTIFY SRC]
*
[ON]
: Enables SPOTIFY/SPOTIFY BT in source selection. ;
[OFF]
: Disables.
(Page 11)
[BUILT-IN AUX]
*
[ON]
: Enables AUX in source selection. ;
[OFF]
: Disables. (Page 9)
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]
: Starts upgrading the firmware. ;
[NO]
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
3
[FACTORY RESET]
[YES]
: Resets the settings to default (except the stored station). ;
[NO]
: Cancels.
[CLOCK]
[TIME SYNC]
[ON]
: The clock time is automatically set using the Clock Time (CT) data
in FM Radio Data System signal. ;
[OFF]
: Cancels.
[CLOCK DISPLAY]
[ON]
: The clock time is shown on the display even when the unit is
turned off. ;
[OFF]
: Cancels.
[ENGLISH]
Select the display language for menu and music information if applicable.
By default,
[ENGLISH]
is selected.
[ESPANOL]
GETTING STARTED
