16
ENGLISH
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Perform ‘Select an item (page 3 or 4)’ operation to select an
item (see the following table).
3
Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
.
Default:
[XX]
[SETTINGS]
[AUTO ANSWER]
[01 SEC]
to
[30 SEC]
: Answers an incoming call automatically in the selected
time (in seconds). ;
[OFF]
: Cancels.
[RING COLOR]
[COLOR 01]
to
[COLOR 49]
(
[COLOR 08]
): Selects the illumination color for
the buttons or symbolic button as notification when there is an incoming call
and during a call. ;
[OFF]
: Cancels.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1
Press
to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press
again to switch to
the other phone.
“(Second device name)” appears.
2
Perform ‘Select an item (page 3 or 4)’ operation to select an
item (see the following table).
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
.
BLUETOOTH®
[RECENT CALL]
(Applicable only if the phone supports PBAP.)
1
Press the following button to select a name or a phone number.
KD-T902BT: Volume knob
KD-T901BT: VOL +/–
• “<” indicates call received, “>“ indicates call made, “M” indicates call
missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2
Press the following to call.
KD-T902BT: Volume knob
KD-T901BT:
*
ENTER
[PHONEBOOK]
(Applicable only if the phone supports PBAP.)
1
Press 2
J
/ 1
K
to select the desired letter (A to Z, 0 to 9, and OTHERS).
• “OTHERS” appears if the first character is other than A to Z, 0 to 9.
2
Perform ‘Select an item (page 3 or 4)’ operation to select a name.
3
Perform ‘Select an item (page 3 or 4)’ operation to select a phone
number to call.
• The phonebook of the connected phone is automatically transferred to the
unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” are
showns as “U”.)
[DIAL NUMBER]
1
Perform the following operation to select a number (0 to 9) or character
( , #, +).
KD-T902BT: Turn the volume knob
KD-T901BT: Press VOL +/–
2
Press
S
/
T
to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3
Press the following to call.
KD-T902BT: Volume knob
KD-T901BT:
*
ENTER
[VOICE]
Speak the name of the contact you want to call or the voice command to
control the phone functions. (See “Make a call using voice recognition” on
page 17.)
