ENGLISH
17
Make a call using voice recognition
1
Press and hold
to activate the connected phone.
2
Speak the name of the contact you want to call or the voice command
to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1
Press
to enter Bluetooth mode.
2
Perform ‘Select an item (page 3 or 4)’ operation to select
[RECENT CALL]
,
[PHONEBOOK]
or
[DIAL NUMBER]
.
3
Perform ‘Select an item (page 3 or 4)’ operation to select a
contact or enter a phone number.
If a contact is selected, press the following to show the phone number.
KD-T902BT: Volume knob
KD-T901BT:
*
ENTER
4
Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select
[DIAL NUMBER]
in step 2
and store a blank number.
BLUETOOTH®
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the following to call.
KD-T902BT: Volume knob
KD-T901BT:
*
ENTER
“NO PRESET” appears if there is no contact stored.
Bluetooth mode settings
1
Press and hold
.
2
Perform ‘Select an item (page 3 or 4)’ operation to select an
item (see the following table).
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[BT MODE]
[PHONE SELECT]
* Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
[AUDIO SELECT]
*
[DEVICE DELETE]
1
Perform ‘Select an item (page 3 or 4)’ operation to select a device
to delete.
2
Perform ‘Select an item (page 3 or 4)’ operation to select
[YES]
or
[NO]
.
* You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time.
