9
ENGLISH
5
Set the clock system.
1
Select “24H/12H.”
2
Adjust “24Hours” or “12Hours.”
6
Finish the setting.
To check the current clock time when the unit
is turned off,
press DISP (D).
The power turns on and the clock time is shown
for about 5 seconds, then the power turns off.
Selecting the level meter
You can show the level meters on the display
while playing any source. This unit is equipped
with three level meter patterns.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 40.)
2
Press number button 3 to select
“DISP”—Display category of the PSM
settings.
3
Select “Theme.”
ATT
1
2
SEL
4
Select the level meter pattern you
want.
As you turn the control
dial, the level meters
change as follows:
5
Finish the setting.
Standard:
No level meter appears on the display. (Initially
selected when shipped from the factory.)
Meter 1:
The left and right audio level meters appear.
Meter 2:
Level meters fluctuate horizontally from center to
both sides as audio levels changes.
Meter 3:
Signal waves fluctuate at the center and spread
outward.
SEL
Meter 1
Standard
Meter 2
Meter 3
SEL
3
ATT
EN07-09SH9105[U]f.p65
03.3.6, 16:20
9
