JVC KD-SH9105 Instructions Manual Download Page 25

Page: 25 / 69

ENGLISH

DSP OPERATIONS

SEL

DSP

Canceled

iEQ

SEL

Press SEL (select) once to show the
DSP mode selection screen.

The last selected DSP mode
screen appears.

• If you press the button twice or more, the

unit enters different sound adjustment
modes.

• For iEQ (sound mode) settings, see pages

28 and 29.

• For SEL (basic sound) settings, see pages

30 and 31.

Press the number button to select
one of the DSP modes listed on the
display.

• This unit has two DSP mode selection

screens. To move to the other screen,
press

(up) or

∞

(down).

Selecting the DSP modes

Using the DSP (Digital Signal Processor) modes
built in this unit, you can create a more acoustic
sound field in your car compartment.

Available DSP modes:

THEATER:

Reminds you of the intensity
reproducing a theater.

HALL:

Reminds you of a large concert
hall with a being-there feeling.

CLUB:

Reminds you of powerfulness
reproduced in a dance club.

DOME:

Reminds you of a dome with a
high ceiling.

STUDIO:

Reminds you of live sounds in a
recording studio.

V. CANCEL:

Reduces the vocal sounds (Voice
Cancel). Good for mastering your
favorite songs—Karaoke.

DEFEAT:

Cancels the DSP modes.

Note:

Effectiveness of “V.CANCEL” depends on the
recording condition of the sources. Especially, if you
play back the following sources you cannot get the
satisfactory results.
• Monaural sources such as AM and monaural FM

broadcasting programs,

• Multiplex sound sources, and
• Sources recorded with duets, strong echo, a chorus,

or only a few instruments.

Press

(up) or

∞

(down).

CONTINUED ON THE NEXT PAGE

EN25-31SH9105[U]f.p65

03.3.6, 16:24

Summary of Contents for KD-SH9105






































































Search results

Summary of Contents for KD-SH9105

Reviews:

Related manuals for KD-SH9105

Brands by name

Popular brands

JVC KD-SH9105, Instructions Manual

Search results

Summary of Contents for KD-SH9105

Reviews:

Related manuals for KD-SH9105

Brands by name

Popular brands