JVC KD-SH9105 Instructions Manual Download Page 15

Page: 15 / 69

ENGLISH

CD OPERATIONS

Playing a disc

Open the control panel.

Insert a disc into the loading slot.

The unit draws the
disc, the control panel
goes back to the
previous position (see
page 45), and
playback starts
automatically.

All tracks will be played repeatedly until you stop
playback.

Notes:

• MP3 or WMA discs require a longer readout time.

(It differs due to the complexity of the folder/track
configuration.)

• For details on playable discs and other related

information, see page 58.

• Microsoft and Windows Media are either registered

trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.

: Folders and their playback order

: MP3/WMA tracks and their playback

order

This unit has been designed to reproduce CDs,
CD-Rs (Recordable), CD-RWs (Rewritable), and
CD Texts.

• This unit is also compatible with MP3 and

WMA discs. For details about these discs,
refer to “A Guide to MP3/WMA” (separate
volume).

About MP3 and WMA discs

MP3 and WMA (Windows Media

Audio) “

tracks

”

(word “file” is not used to indicate MP3 or WMA
files, “track” is used in this manual) are recorded
in “

folders

.”

During recording, the tracks and folders can be
arranged in a way similar to arranging files and
folders of computer data.
“

Root

” is similar to the root of a tree. Every track

and folder can be linked to and be accessed from
the root.

SRC

DISP

ATT

SEL

BBE

MODE

Hierarchy

ROOT

Level 1

Level 2

Level 3

Level 4

Level 5

EN15-24SH9105[U]f.p65

03.3.6, 16:23

Summary of Contents for KD-SH9105






































































Search results

Summary of Contents for KD-SH9105

Reviews:

Related manuals for KD-SH9105

Brands by name

Popular brands

JVC KD-SH9105, Instructions Manual

Search results

Summary of Contents for KD-SH9105

Reviews:

Related manuals for KD-SH9105

Brands by name

Popular brands