JVC KD-SH9105 Instructions Manual Download Page 56

Page: 56 / 69

ENGLISH

What appears to be trouble is not always serious. Check the following points before calling a service
center.

TROUBLESHOOTING

Remedies

Stop playback while driving on
rough roads.

Change the disc.

Check the cords and
connections.

Set it to “On” (see page 42).

Check the cords and
connections.

Insert the disc correctly.

• Insert a finalized

CD-R/CD-RW.

• Finalize the CD-R/CD-RW

with the component which
you used for recording.

Unlock the disc (see page 23.)

While holding

, press

for more than 2 seconds to eject
the disc.

Press the reset button on the
control panel using a ball-point
pen (see page 2).

Press the reset button on the
control panel using a ball-point
pen (see page 2). If the reset
button does not work. Check the
installation. (Ex. you have used a
screws which are longer than
specified.)

Adjust the output level on the
external compo

nent.

Remove the control panel, wipe
the connectors, then attach it
again (see page 46).

Store stations manually.

Connect the antenna firmly.

Causes

You are driving on rough
roads.

Disc is scratched.

Connections are incorrect.

The “PowerAmp” setting is set
to “Off.”

Connections are incorrect.

Disc is inserted upside down.

CD-R/CD-RW is not finalized.

Disc is locked.

The CD player may function
incorrectly.

The built-in microcomputer
may have functioned
incorrectly due to noise, etc.

There is something blocking
the control panel movement.

Input level through the
external component (LINE
IN) is too high.

The control panel is not
attached correctly and firmly.

Signals are too weak.

The antenna is not connected
firmly.

Symptoms

• Sound is sometimes

interrupted.

• Sound cannot be heard

from the speakers.

• CD-R/CD-RW cannot be

played back.

• Tracks on the CD-R/CD-RW

cannot be skipped.

• Disc cannot be ejected.

• Disc cannot be recognized

(“No Disc,” “Loading Error,”
or “Eject Error” flashes).

• This unit does not work at

all.

• When “Reset P00” to “Reset

P44” appears on the
display.

•

(INPUT

OVER) indicator appears
on the display.

•

“Panel Connect Error”
appears on the display.

• SSM automatic preset

does not work.

• Static noise while listening

to the radio.

FM/AM

General Pla

ybac

EN55-59SSH9105[U]f.p65

03.3.6, 16:30

Summary of Contents for KD-SH9105






































































Search results

Summary of Contents for KD-SH9105

Reviews:

Related manuals for KD-SH9105

Brands by name

Popular brands

JVC KD-SH9105, Instructions Manual

Search results

Summary of Contents for KD-SH9105

Reviews:

Related manuals for KD-SH9105

Brands by name

Popular brands