JVC KD-R771BT, Instruction Manual

Page: 20 / 116

18
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Crossover settings
Below are the available setting items for 2-way crossover and 3-way
crossover.
Caution
Select a crossover type according to how the speakers are connected.
(
29 )
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
SPK SIZE (speaker size)
Selects according to the connected speaker size for optimum
performance.
•
The frequency and slope settings are automatically set for the
crossover of the selected speaker.
• If [ NONE ] is selected for [ TWEETER ] of [ FRONT ], [ REAR ] and [ SUBWOOFER ] for
[
SPK SIZE
], the [
X ‘ OVER
] setting of the selected speaker is not available.
X ‘ OVER (crossover)
[ FRQ ]/ [ HPF FRQ ]/ [ LPF FRQ ]:
Adjusts the crossover frequency for the selected speakers (high pass
filter or low pass filter).
• If [ THROUGH ] is selected, all signals are sent to the selected speakers.
[ SLOPE ]/ [ HPF SLOPE ]/ [ LPF SLOPE ]:
Adjusts the crossover slope.
•
Selectable only if a setting other than [
THROUGH
] is selected for the
crossover frequency.
[ PHASE ]:
Selects the phase of the speaker output to be in line with the other
speaker output.
[ GAIN LEFT ]/ [ GAIN RIGHT ]/ [ GAIN ]:
Adjusts the output volume of the selected speaker.
(For KD-R771BT )
Setting on
[
SPK/PRE OUT]
Audio signal through lineout terminal
REAR/SW
REAR/REAR Rear speakers output
REAR/SUB.W (default) Subwoofer output
SUB.W/SUB.W Subwoofer output
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output.
(
29
)
Setting on
[ SPK/PRE OUT]
Audio signal through rear speaker lead
L (left) R (right)
REAR/REAR Rear speakers output Rear speakers output
REAR/SUB.W Rear speakers output Rear speakers output
SUB.W/SUB.W Subwoofer output (Mute)
If [ SUB.W/SUB.W ] is selected:
– [
HIGH 120HZ
] is selected in [
SUB.W LPF
] and [
THROUGH
] is not available.
– [
R02
] is selected in [
FADER
] and selectable range is [
R15
] to [
00
]
AUDIO SETTINGS
JS_JVC_KD_R971BT_M_EN_4.indd 18 JS_JVC_KD_R971BT_M_EN_4.indd 18 6/10/2015 8:54:21 AM 6/10/2015 8:54:21 AM