JVC KD-LH915 Instructions Manual Download Page 40

Page: 40 / 52

ENGLISH

More about this receiver

Basic operations

Turning on the power

• By pressing SOURCE on the receiver, you

can also turn on the power.

Turning off the power

• If you turn off the power while listening to a

disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.

Selecting the source

• When no disc or SD card is loaded in the

receiver, “CD” or “SD” cannot be selected.

• Without connecting to the CD changer,

“CD-CH” cannot be selected.

• To select the “EXT-IN” for the playback

source, set the “Ext Input” setting correctly
(see page 32).

Tuner operations

Storing stations in memory

• During SSM search...
– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in

No. 1 will be automatically tuned in.

• When storing a station manually, a previously

preset station is erased when a new station is
stored in the same preset number.

Disc/SD card operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does

not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.

General

• This receiver has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format and MP3/WMA files
recorded in an SD card.

• When a disc or an SD card has been loaded,

selecting “CD” or “SD” for the playback
source starts playback.

• When a track or folder whose number is

greater than 99 is selected, the icon before the
number ( , ) goes off (to show its assigned
3-digits number).

Inserting a disc

• When a disc is inserted upside down, the

control panel moves down, and the disc
automatically ejects from the loading slot.

• If you keep the control panel open for about 1

minute, (beep sound when the “Beep” setting
is turned “On”—see page 32) the control
panel returns to its previous position.

• Do not insert 8 cm discs (single CD) and

unusual shape discs (heart, flower, etc.) into
the loading slot.

Playing a disc/SD card

• While playing an audio CD: If a title has been

assigned to the audio CD (see page 36), it will
be shown on the display.

• While fast-forwarding or reversing an MP3 or

WMA track, you can only hear intermittent
sounds.

• While playing an SD card, the playback order

may differ from other SD players.

• This receiver may be unable to play back

some SD cards due to their characteristics or
recording conditions.

• This receiver cannot play back mini SD card

and MMC.

• If the inserted SD card does not have the

correct files, “SD” is skipped.

EN38-43_KD-LH915[U_UH]f.indd 40

12/23/04 5:36:11 PM

Summary of Contents for KD-LH915





















































Search results

Summary of Contents for KD-LH915

Reviews:

Related manuals for KD-LH915

Brands by name

Popular brands

JVC KD-LH915, Instructions Manual

Search results

Summary of Contents for KD-LH915

Reviews:

Related manuals for KD-LH915

Brands by name

Popular brands