JVC KD-LH915 Instructions Manual Download Page 7

Page: 7 / 52

ENGLISH

Remote controller —

RM-RK300

Installing the lithium coin battery

(CR2025)

• When operating, aim the remote controller

directly at the remote sensor on the
receiver. Make sure there is no obstacle in
between.

Warning:

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

Caution:

Main elements and features

(standby/on/attenuator) button

• Turns on and off the power and also

attenuates the sound.

SOURCE button

• Selects the source.

(up) /

∞

(down) buttons

• Changes the preset stations.
• Changes the MP3/WMA folders.

VOL (volume) + / – buttons

• Adjusts the volume level.

Number buttons

• Selects the preset station if pressed, or

store a station if pressed and held.

• Selects the tracks while playing an audio

CDs or CD Texts.

• Selects the folders while playing

MP3/WMA discs or an SD card.

• Selects the discs while operating the CD

changer.

ANGLE button

• Adjusts the control panel angle.

BAND button

• Selects the band for FM/AM.

buttons

• Searches for stations if pressed, or skips

frequencies after pressed and held.

• Changes the tracks of the disc or of the

SD card if pressed.

• Fast-forwards or reverses the track if

pressed and held.

EN02-07_KD-LH915[U_UH]f.indd 7

12/23/04 5:34:03 PM

Summary of Contents for KD-LH915





















































Search results

Summary of Contents for KD-LH915

Reviews:

Related manuals for KD-LH915

Brands by name

Popular brands

JVC KD-LH915, Instructions Manual

Search results

Summary of Contents for KD-LH915

Reviews:

Related manuals for KD-LH915

Brands by name

Popular brands