14
ENGLISH
Sound adjustments
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
appears on the display, you can
move back to the previous display by pressing
number button 3.
1
2
•
For “EQ” setting, see the following.
3
Adjust the selected setting item.
A
Fad/Bal (Fader/Balance)
1
Press number button 1 (
) to
move to the “Fad/Bal” adjustment
display.
2
Adjust the speaker output balance
by pressing:
5
/
∞
: between the front and rear
speakers. [F06 to R06]
4
/
¢
:
between the left and right
speakers. [L06 to R06]
B
Subwoofer
1
Press number button 1 (
) to
move to the “Subwoofer” adjustment
display.
2
Use
4
/
¢
to select a
cutoff frequency to the subwoofer.
• 80Hz: Frequencies higher than
80 Hz are cut off.
• 120Hz: Frequencies higher than
120 Hz are cut off.
• 160Hz: Frequencies higher than
160 Hz are cut off.
3
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
C
VolAdjust
Turn the control dial to adjust the input
level of each source (except FM).
[–5 to +5]
Adjust to match the input level of the
FM sound level.
•
Before making an adjustment, select a
source you want to adjust.
D
Loudness
Turn the control dial to activate or
deactivate the loudness to produce a
well-balanced sound at low volume
levels. [Off or On]
4
Exit from the setting.
Selecting preset sound modes
(i-EQ: intelligent equalizer)
You can select a preset sound mode suitable to
the music genre.
Available sound modes
FLAT
(No sound mode is applied)
,
H.ROCK
(Hard rock)
,
R & B
(Rhythm & blues)
,
POP, JAZZ, DANCE, COUNTRY, REGGAE,
CLASSIC, USER 1, USER 2, USER 3
EN14-23_KD-G828[UT]1.indd 14
EN14-23_KD-G828[UT]1.indd 14
3/21/06 11:20:00 AM
3/21/06 11:20:00 AM
