JVC KD-G815, Service Manual

Page: 14 / 95

1-14 (No.MA170)
3.2.2 Removing the connector board
(See Figs.3 to 5)
CAUTION:
Before disconnecting the flexible wire from the pickup, solder
the short-circuit point on the pickup. No observance of this in-
struction may cause damage of the pickup.
(1) Remove the screw B fixing the connector board.
(2) Solder the short-circuit point on the pickup.
(3) Disconnect the flexible wire from the pickup.
(4) Move the connector board in the direction of the arrow to
release the two joints
b
.
(5) Unsolder the wires on the connector board if necessary.
CAUTION:
Unsolder the short-circuit point after reassembling.
Fig.3
Fig.4
Fig.5
Þ
ݱ²²»½¬±® ¾±¿®¼
з½µ«°
͸±®¬ó½·®½«·¬ °±·²¬
Ö±·²¬- ¾
É·®»-
з½µ«°
͸±®¬ó½·®½«·¬ °±·²¬
øͱ´¼»®·²¹÷
Ú´»¨·¾´» ©·®»
Þ
Ú´»¨·¾´» ©·®»
ݱ²²»½¬±® ¾±¿®¼
Ú®¿³»