JVC KD-DV9405 Instructions Manual Download Page 9

Page: 9 / 68

OPERATIONS

Continued on the next page

Installing the batteries

Insert the batteries into the remote controller by
matching the polarity (+ and –) correctly.

Caution:

Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.

If the effectiveness of the remote controller
decreases, replace both batteries.

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the unit.

• DO NOT expose the remote sensor to bright light

(direct sunlight or artificial lighting).

Using the remote controller (RM-RK252)

R03/LR03/AAA

Remote sensor

IMPORTANT:

If Dual Zone is activated (see page 25), the remote
controller only functions for operating the DVD/CD
player.

button

• Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

• Switches the conversation media during a

phone call conversation.

EN02-09_KD-DV9406_005A_1.indd 9

22/4/08 4:11:54 PM

Summary of Contents for KD-DV9405





































































Search results

Summary of Contents for KD-DV9405

Reviews:

Related manuals for KD-DV9405

Brands by name

Popular brands

JVC KD-DV9405, Instructions Manual

Search results

Summary of Contents for KD-DV9405

Reviews:

Related manuals for KD-DV9405

Brands by name

Popular brands