JVC KD-DV9405 Instructions Manual Download Page 57

Page: 57 / 68

REFERENCES

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

Symptom

Remedy/Cause

General

• Sound cannot be heard from the speakers.

• Adjust the volume to the optimum level.
• Check the cords and connections.

• The unit does not work at all.

Reset the unit (see page 3).

• “Connect Error” appears on the display.

Remove the control panel, wipe the connector, then
attach it again (see pages 4 and 48).

FM/AM

• SSM automatic presetting does not work.

Store stations manually.

• Static noise while listening to the radio.

Connect the antenna firmly.

Discs in general

• Disc cannot be played back.

Insert the disc correctly.

• Disc can be neither played back nor ejected.

• Unlock the disc (see page 14).
• Eject the disc forcibly (see page 3).

• Recordable/Rewritable discs cannot be

played back.

• Tracks on the Recordable/Rewritable discs

cannot be skipped.

• Insert a finalized disc.
• Finalize the discs with the component which you

have used for recording.

• Disc cannot be recognized.

Eject the disc forcibly (see page 3).

• Sound and pictures are sometimes

interrupted or distorted.

•  Stop playback while driving on rough roads.
•  Change the disc.
•  Check the cords and connections.

• No playback picture (DVD-Video/DivX/MPEG/

VCD) appears on the monitor.

Parking brake wire is not connected properly. (See
Installation/Connection Manual.)

• No picture appears on the monitor at all.

• Connect the video cord correctly.
• Select a correct input on the monitor.

• The left and right edges of the picture are

missing on the monitor.

Select “4:3 LETTERBOX” (see page 44).

Continued on the next page

EN54-63_KD-DV9406_005A_1.indd 57

22/4/08 4:11:24 PM

Summary of Contents for KD-DV9405





































































Search results

Summary of Contents for KD-DV9405

Reviews:

Related manuals for KD-DV9405

Brands by name

Popular brands

JVC KD-DV9405, Instructions Manual

Search results

Summary of Contents for KD-DV9405

Reviews:

Related manuals for KD-DV9405

Brands by name

Popular brands