(No.MA387<Rev.003>)1-19
3.2.11 Removing the mode switch
(See Fig.16)
• Remove the top cover, base board, chassis unit, clamper as-
sembly, trigger arm and top plate assembly.
(1) From the top side of the top plate assembly, remove the
link gear spring from the sections
x
of the link gear L and
link gear R.
(2) Remove the link gear L in an upward direction while releas-
ing the claws
y
of the link gear L in the direction of the ar-
row.
(3) Move the mode switch in the direction of the arrow 1 to re-
move the sections
z
of the top plate assembly.
(4) Move the mode switch in the direction of the arrow 2 and
remove the mode switch from the sections (
aa
,
ab
).
Note:
When reattaching the link gear L, attach it after aligning the
hole
ac
of the link gear L to the hole
ac
of the link gear R.
Reference:
When reassembling, reverse the above removing procedure.
Fig.16
1
2
Link gear L
Link gear R
Top plate assembly
Link gear spring
Mode switch
x
y
y
ab
aa
ac
ac
Link
gear R
Link
gear L
z
Summary of Contents for KD-BT11E
Page 29: ... No MA387 Rev 003 1 29 ...
Page 66: ... M E M O ...
