(No.MA425<Rev.001>)1-7
SECTION 3
DISASSEMBLY
3.1
Main body (Used figure are KD-AV7100E)
3.1.1 Removing the Top chassis (See Fig.1 to 7)
(1) Remove the two screws
A
attaching the FPC cover. (See
Fig.1)
(2) Disconnect the FPC wire connected to connector
CON11
and
CON19
of the Main board. (See Fig.2)
(3) Remove the two screws
B
attaching the Top chassis. (See
Fig.3)
(4) Remove the four screws
C
attaching the both side of the
Top chassis. (See Fig.4)
(5) Remove the two screws
D
attaching the both side of the
Front chassis. (See Fig.4)
(6) Disengage two hooks
a
engaged both side of the Front
chassis. (See Fig.5)
(7) Disconnect the connector wire from Front chassis connect-
ed to connector
CON2
of the USB board. (See Fig.6)
(8) Tear off an FPC from a CD mechanism and then remove
the Top chassis. (See Fig.7)
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
A
FPC cover
CON11
CON19
B
C
D
hook
a
CON2
FPC
