JVC KD-ABT22 Instructions Manual Download Page 104

Page: 104 / 314

ENGLISH

Symptoms

Remedies/Causes

CD changer

• “No Disc” appears on the display.

Insert a disc into the magazine.

• “No Magazine” appears on the display.

Insert the magazine.

• “Reset 08” appears on the display.

Connect this unit and the CD changer correctly and press
the reset button of the CD changer.

• “Reset 01” – “Reset 07” appears on the

display.

Press the reset button of the CD changer.

• The CD changer does not work at all.

Reset the unit (see page 3).

DAB

• “No DAB Signal” appears on the display.

Move to an area with stronger signals.

• “Reset 08” appears on the display.

Connect this unit and the DAB tuner correctly and reset
the unit (see page 3).

• The DAB tuner does not work at all.

Reconnect this unit and the DAB tuner correctly and
reset the unit (see page 3).

• “Antenna Power NG” appears on the

display.

Check the cords and connections.

iPod

• The iPod does not turn on or does not work. • Check the connecting cable and its connection.

• Update the firmware version.
• Charge the battery.

• The sound is distorted.

Deactivate the equalizer either on this unit or the iPod.

• “Disconnect” appears on the display.

• Check the connecting cable and its connection.
• Charge the battery.

• Playback stops.

The headphones are disconnected during playback.
Restart the playback operation (see pages 26 and 27).

• No sound can be heard when connecting an

iPod nano.

• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.

• “No File” appears on the display.

No tracks are stored. Import tracks to the iPod.

• “Reset 01” – “Reset 07” appears on the

display.

Disconnect the adapter from both this unit and iPod.
Then, connect it again.

• “Reset 08” appears on the display.

Check the connection between the adapter and this unit.

• The iPod’s controls do not work after

disconnecting from this unit.

Reset the iPod.

EN46-49_KD-BT22[E]_003A_f.indd 46

1/22/08 5:35:29 PM

Summary of Contents for KD-ABT22



























































































































































































































































































































Search results

Summary of Contents for KD-ABT22

Reviews:

Related manuals for KD-ABT22

Brands by name

Popular brands

JVC KD-ABT22, Instructions Manual

Search results

Summary of Contents for KD-ABT22

Reviews:

Related manuals for KD-ABT22

Brands by name

Popular brands