JVC KA-DV350U, Instructions Manual

Page: 27 / 64

36
When setting is completed for items other than HTTP USER NAME and
FTP USER NAME, the unit will return to the previous screen (NETWORK
MAIN SETUP or SERVER SETUP menu screen).
Example:
Changing HTTP USER NAME from
jvc to jvc_1234
Setup for network settings
Network related settings are made in the individual input setting screens.
Here, HTTP USER NAME is set as an example. Other settings are also made in the same manner.
1.
Select HTTP USER NAME in the SERVER SETUP menu
screen and press the SELECT dial.
• The HTTP USER NAME input setting screen appears.
2.
Characters are selected from the character selection area on
the bottom of the screen.
Turn the SELECT dial to flash “_” in the character selection
area and press the SELECT dial.
• The setting changes to “jvc_” and the following digit of the
setting area flashes.
3.
Turn the SELECT dial to select “1” in the character selection
area and press the SELECT. dial.
• The setting changes to “jvc_1” and the following digit of the
setting area flashes.
4.
Repeat the above step to set “jvc_1234” in the setting area.
• To delete or edit set characters, select “BS” within the char-
acter selection area and press the SELECT dial.
The previous character will be deleted. The character on the
left will be deleted each time this operation is repeated.
• When turning the SELECT dial while holding down the STOP
button, the cursor will move 5 characters at a time.
• The currently inputted number of characters and the maxi-
mum number of characters are displayed on the upper right
of the screen.
• To cancel a setting, select the “
6
” within the character se-
lection area and press the SELECT dial. The unit will return
to the previous screen (SERVER SETUP menu screen).
5.
When completed, select “ ” within the character selection area
and press the SELECT dial.
●
When changing the HTTP USER NAME or FTP USER
NAME, “NEXT STEP SET PASSWORD” will appear on the
screen and the PASSWORD menu screen is displayed. Set
the password using the procedure shown above.
Setup of the GY-DV300
When using a wireless LAN and one PC
4 / 8
R S E U P T T H NA E M
j v c
a b c d e f g h i j k l m n o p q r s t u v
wx y z 0 1 2 3 4 5 6 7 8 9
_
6
_ . BSA ¯
5 / 8
j v c 1
a b c d e f g h i j k l m n o p q r s t u v
wx y z 0 1 2 3 4 5 6 7 8 9
_
6
_
. BSA ¯
R S E U P T T H NA E M
3 / 8
R SE U
j v c
a b c d e f g h i j k l m n o p q r s t u v
wx y z 0 1 2 3 4 5 6 7 8 9
6
_ . BSA ¯
NAME T T P H
8 / 8
j v c 1 2 3 4
a b c d e f g h i j k l m n o p q r s t u v
wx y z 0 1 2 3 4 5 6 7 8 9
_
6
_
. BSA ¯
R S E U P T T H NA E M
HTTP USER NAME input setting screen
: The set text is confirmed and
returns to the previous screen.
Currently inputted number of characters/
max.number of characters
Setting area Character
selection area
BS: Backspace (delete previous character)
6
: The set text is canceled and
returns to the previous screen.
Memo Memo
Memo Memo
POWER
OFF ON
MODE
CAM-B
VTR
SHUTTER
MENU
GAIN
CAM-A
BAR
AW
FWD
REV
SELECT
dial
<GY-DV300 rear panel>
STOP button
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
Setup of the GY-DV300
When using a wireless LAN and one PC
37
Detailed IP Address settings (LAN)
When connecting a single PC to the GY-DV300/KA-DV350 in a 1-to-1 connection scheme, set up the IP addresses and
subnet masking as described in the following. Note that the following connection method is an example for
communicating with the PC without using an access point (Ad hoc mode)
•For the PC settings when using a
LAN card, refer to the instruction
manual included with the LAN
card.
•Do not perform encryption of the
wireless LAN.
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
Set the same network group
Set a unique number to avoid doubling
DHCP OFF
WLAN AD HOC MODE ON
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 101
NETMASK 255. 255. 255. 000
PC wireless LAN driver settings
NetworkType
802. 11 Ad Hoc Mode
ESS ID abcdef
Channel 2
Encryption Mode Open System
PROXY SERVER OFF
DHCP SERVER OFF
IP ADDRESS 192. 168. 100. 100
NETMASK 255. 255. 255. 000
Memo Memo