JVC InteriArt LT-23D50BK, Service Manual

Page: 63 / 97

- 37 -
Contrast, Bright-1, Colour and Sharpness
are described at Picture menu on page 27 .
Setting PIP Size
• Using “ ” or “ ” button select PIP Size.
• Press “ ” or “ ” button to change PIP size.
Two different PIP sizes are available.
Setting PIP Position
• Using “ ” or “ ” button select PIP Posi-
tion.
• Press “ ” or “ ” button to change PIP posi-
tion.
There are four different PIP positions.
Programme in the PIP window
can be
changed by “ / ” , digit buttons or
AV button. All EXT modes (Except EXT-3) are
also available in PIP window. PIP window is
removed from the screen by “
” button.
Source Menu
In the Main menu, select “ Source ” using
“ ” or “ ” button, then enter the Source
menu
by pressing “ ” / “ ” or “ OK ” buttons.
6RXUFH3&
79
(;7
(;7
(;76
(;7
(;7
(;76
3&
',*,7$/
Select the available sources of DIGITAL , TV,
EXT-1, EXT-2, EXT-2 S, EXT-3, EXT-4, EXT-
4S or PC using “ ” or “ ” button and by
pressing “ ” / “ ” or “ OK ” buttons.
Sound in PC mode
• Connect the PC’s Audio output to the TV’s
PC Audio In socket with an audio cable.
• On your remote control,using “ ” button to
select sound source from TV, EXT-1,
EXT-2, EXT-3, EXT-4 and PC options.
• When PIP is displayed on the screen, “ ”
button allows you to switch sound between
PC and selected PIP source.
No-Signal and Out Of Range
Detection (PC mode)
In PC Mode,as no menu is displayed,in
case that there is no PC input to the TV, it is
displayed an OSD message:
No input signal detected
then the power lamp turns to amber and PC
will be in PC standby mode. Press AV but-
ton, digit buttons or
“ ” / “ ” buttons
to exit standby mode.
In PC Mode, as no menu is displayed,in
case that there is no PC input to the TV, but
the resolution and the vertical frequency is
not supported by the concept, it is displayed
an OSD message:
Signal out of range
Analogue Teletext
Teletext is an information system that dis-
plays text on your TV screen. Using the Tele-
text information system you can view a page
of information on a subject that is available
in the list of contents (index).
On screen display is not available in text
mode.
Contrast, brightness or colour control is not
available, but volume control is available in
text mode.
To operate Teletext
• Select a TV station on which Teletext is being
transmitted.
• Press (TELETEXT) “ ” button. Usually the
list of contents (index) is displayed on the
screen.
7230(18
ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65 24.02.2005, 08:20 37