JVC InteriArt LT-23D50BK, Service Manual

Page: 60 / 97

- 34 -
this volume is set to the preceding value,
and the second one is increasing the vol-
ume level.
No-Signal Detection (TV mode)
If no valid signal detected, it takes 5 minutes
to switch to the Stand-By mode unless any
signal detected or any Remote Control com-
mand is accessed.
After a Remote Control command (if No-Sig-
nal Timer is active) the timer stops and if no
signal detected again the timer is initialized
to 5 minutes and starts 3 seconds later
again to count down.
It is not valid in EXT modes.
Volume Bar
It is displayed in the lower middle of the
screen. When a volume command is re-
ceived (pressing
“ +” or “ -” by Re-
mote Control or Control panel at the top of
the TV) and no menu is active, it stays on the
screen for 3 seconds, after the last volume
command or until another command is re-
ceived in between.
EXT Modes
By pressing the “ AV ” button you can switch
your TV to EXT modes (except being in Tele-
text). Pressing this button will consecutively
switch the TV in one of the optional EXT
modes: EXT-1, EXT-2, EXT-2 S, EXT-3, EXT-
4, EXT-4 S and PC .
In order to quit the EXT mode press any digit
buttons or
“ ” or “ ”
Zoom Modes
Zoom mode can be changed by pressing
Zoom button. You can change the screen
size according to the picture aspect ratio.
Select the optimum one from the following
ZOOM modes.
AUTO:
When a WSS (Wide Screen Signalling) sig-
nal, which shows the aspect ratio of the pic-
ture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the ZOOM mode to
16:9 ZOOM mode PANORAMIC or FULL
mode according to the WSS signal.
• When the AUTO mode does not function cor-
rectly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.
Using the different screen formats
Press the Red button to select the different
modes: Auto,Full, Regular, Panoramic,14:9
Zoom,16:9 Zoom,16:9 Zoom Subtitle
modes.
Note: You can only choose REGULAR and FULL
in PC mode.
FULL:
This uniformly stretches the left and right
sides of a normal picture (4:3 aspect ratio)
to fill the wide TV screen.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the FULL mode to restore the pic-
ture to its original shape.
REGULAR:
Use to view a normal picture (4:3 aspect ra-
tio) as this is its original shape.
PANORAMIC:
This stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the
screen, without making the picture appear
unnatural.
ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65 24.02.2005, 08:20 34