background image

55

The Video Status button gives you a choice of four TV picture display settings, including a 
display of your own preferences.

Standard

 - Resets the picture display to the factory settings.

Dynamic

 -  Gives a vivid picture with better contrast when viewing in 

a brightly lit room.

Theater

 -  Gives a rich, film-like look to video when viewing in a 

dimly lit room.

Game

 -  Used for when you are playing video games connected to 

your TV.

 Press 

the 

V

IDEO

 S

TATUS

 button

 

By every press of the V

IDEO

 S

TATUS

 button, you change the mode.

Note: 

•  

You can also change the mode by pressing the 

π

   buttons.

•   You can also access the FRONT CONTROL PANEL screen by using the M

ENU

 button on 

the front of the TV instead of the remote control.  It appears between INITIAL SETUP and 
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose 
VIDEO STATUS by pressing Menu

  on the front panel and choose a mode by using the 

C

HANNEL

+/- buttons ( 

 OPERATE 

®

 ).

 Video Status

Button Functions

The TheaterPro D6500K color temperature technology function makes sure that the video you 
watch is set to the standard color temperature, so that what you see is as true to what the film 
to video editors intended it to be.

 Press 

the 

T

HEATER

P

RO

 button

 TheaterPro D6500K

VIDEO STATUS

STANDARD

DYNAMIC

THEATER

GAME

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals 
of 15 minutes, for a total time of up to 180 minutes.

 

Press the S

LEEP

 T

IMER

 button

Sleep Timer Message

20 seconds before the automatic shutoff, this message will appear:

You then have 20 seconds to press the S

LEEP

 T

IMER

 button to 

delay the shut off for another 15 minutes.

 Sleep Timer

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

TO EXTEND

0 15 30 45 60 75 90 105 120 135 150 165 180

AV-32S575\585   55

5/11/04, 10:27:55 AM

Summary of Contents for I'Art Pro AV-32S565

























































































































Reviews: