JVC I'Art Pro AV-32S565 User Manual Download Page 110

Page: 110 / 120

The button has two functions:

Return

- Returns to the channel viewed just before the channel currently onscreen.

- Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

ETURN

+ and hold for three seconds

The channel currently active has been programmed as your channel. Now scan

through the channels using the C

HANNEL

+/- buttons.

ETURN

You will return to your programmed channel.

• To cancel your channel, press and hold the R

ETURN

+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• works only with the C

HANNEL

+/- buttons. Pressing any number key will cancel

Button Functions

By pressing the S

OUND

button, you can change the A.H.S. (Advanced Hyper Surround) mode,

BBE, and SMART SOUND on or off.

A.H.S. -

Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.

BBE -

BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism.

SMART SOUND -

Decreases high sound levels, giving a regulated sound level.

Press the S

OUND

button

†

To select A.H.S., BBE or SMART SOUND

√

To choose the setting

Press the M

ENU

when finished

Note:

Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound,

Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.

Sound

The M

UTING

button instantly turns the volume down completely when you press it. Press

UTING

and the volume level will instantly go to zero. To restore the volume to its previous

level, press M

UTING

again.

Muting

SOUND EFFECT

SELECT

OPERATE

EXIT

A.H.S.

BBE

SMART SOUND

MOVIE MUSIC OFF

ON OFF

RETURN CHANNEL

PROGRAMMED!

AV-32S575\585 54

5/11/04, 10:27:55 AM

Summary of Contents for I'Art Pro AV-32S565

























































































































Search results

Summary of Contents for I'Art Pro AV-32S565

Reviews:

Related manuals for I'Art Pro AV-32S565

Brands by name

Popular brands

JVC I'Art Pro AV-32S565, User Manual

Search results

Summary of Contents for I'Art Pro AV-32S565

Reviews:

Related manuals for I'Art Pro AV-32S565

Brands by name

Popular brands