8
Connections
1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack.
2 ) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack.
• See also ‘TV Speaker’ and ‘Audio Out’ on page 26 for more information on using external speakers.
Connecting to an External Amplifier
Connecting to a DVD Player
1) Connect Green cable out from DVD player “Y” Video Output, in to TV “Y” Component Input.
2) Connect Blue cable out from DVD player “P
B
” Video Output, in to TV “ P
B
” Component Input.
3) Connect Red cable out from DVD Player “P
R
” Video Output, in to TV P
R
” Component Input.
4) Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.
• Green, blue and red are the most common colors for DVD cables. Some models may vary colors, please
consult the user’s manual for your DVD Player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of
connections (DVD or Audio Output) before starting the other to avoid accidentally switching the cables.
• You may also connect the DVD player to Input 4. If you use Input 4 for the DVD connection, you must set
the V4 COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD signal.
•
NOTE:
Progressive DVD Players (players with an output scan of 31.5 KHz) will not work properly with
this television.
