JVC HR-S6955EK, Instructions Manual

Page: 39 / 60

advanced features 39
Editing Using Another VCR
connect up
Connect the player’s 21-pin SCART connector to the recorder’s
21-pin SCART connector as illustrated.
A
When using your VCR as the player ...
... connect its L-1 IN/OUT connector to another VCR.
B
When using your VCR as the recorder ...
... connect its
L-2 IN/DECODER
or
L-1 IN/OUT
connector to another VCR.
set vcr’s input mode
The recording VCR mode must be set to
AUX
. If this
VCR is the recorder, press
AUX
and/or
PR
to select
L-1
(if you’ve used the
L-1 IN/
OUT connector) or L-2 (if you’ve used the L-2 IN/DECODER connector). If this
VCR is the player, set O.S.D. to OFF . (
墌
pg. 42)
set edit mode
See Picture Control on page 31 .
start source vcr
Engage its PLAY mode.
start recording vcr
Engage its
RECORD
mode.
NOTES:
• All necessary cables can be obtained from your dealer.
• For Y/C signal input/output, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.
• When you set
PICTURE CONTROL
to
EDIT
to dub tapes (
墌
pg. 31), be sure to
select
AUTO
(or
NORM
when
B.E.S.T.
is set to
OFF
) after you finish dubbing the
tapes.
HR-S6955EK-EN/p29-41 3/13/02, 05:07 PM 39