June 6, 2003 4:31 pm
Page 11
— 11 —
Master Page: Right
Express Timer Programming
A
Access G-
CODE
screen
Press
PROG
.
B
Access programme screen
Press
START +/–
. (If you’re just starting
out, “P1” appears.)
C
Enter programme start time
Press
START +/–
to enter the time you
want recording to start.
●
Press and hold
START +/–
to move in
30-minute increments, or press and
release repeatedly to move 1 minute at
a time.
D
Enter programme stop time
Press
STOP+/–
to enter the time you want recording to stop.
●
Press and hold
STOP+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter programme date
Press
DATE+/–
. (The current date appears on screen. The date you
enter appears in its place.)
F
Enter channel position
Press
PR +/–
.
G
Set tape speed
Press
p
to set the tape speed.
H
Access title edit screen
Press the
number keys
“1”. The Title Edit
screen appears.
●
You can access the Title Edit screen
only when “PROG. NAVIGATION” is
set to “ON”. (
墌
15)
I
Enter programme title
Press the
number keys
and
PUSH JOG
e
to enter characters, then press
OK
. For
details, refer to “Entering character” on
page 14.
J
Return to normal screen
After confirming all information is
correct, press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the screen for about 5 seconds, then normal screen appears. If
“PROGRAM OVERLAPPED” appears on the screen and “Err” on
the display panel, see page 13.
●
Repeat steps
1
–
10
for each additional programme.
K
Engage recorder’s timer mode
Press
#
. The recorder turns off automatically and “
#
” appears on
the display panel.
●
To disengage the timer, press
#
again.
NOTES:
●
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps
2
through
10
, press
WEEKLY
(
number
key “9”
) for weekly serials or
DAILY
(
number key “8”
) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on screen and “FULL”
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary programmes
(
墌
13).
●
In case of a power failure after programming, the recorder’s
memory backup keeps your selections (if the lithium battery is
not exhausted).
Satellite Tuner Users
To timer-record a satellite broadcast using the G-
CODE
system:
A
Perform steps
1
–
8
.
B
Set the satellite tuner to the appropriate channel before the
selected programme begins.
C
Leave the satellite tuner's power on.
ATTENTION
Regarding Guide Program Number Set
“G-CODE/SHOWVIEW SETUP” appears after performing step
3
if the Guide Program number for the G-
CODE
number you
entered has not been set.
●
Press the
number keys
or
PUSH
JOG
rt
to input the channel
position number on which your
recorder receives that station, then
press
OK
or
PUSH JOG
e
.
The G-
CODE
program screen
appears.
(Ex.) To timer-record a RTR
programme with the G-
CODE
system.
* If your recorder receives RTR on the channel position 2, press
OK
or
PUSH JOG
e
after entering “2”.
Before performing the following steps:
●
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
●
Turn on the TV and select the VIDEO channel (or AV mode).
●
Select the appropriate colour system (
墌
15).
GUIDE PROG
TV PROG
2
– –
G-CODE/SHOWVIEW SETUP
[MENU] : EXIT
[0-9] OR [
R
/
T
]: SELECT
[1] : TITLE
[1] : TITLE
21:00
[1] : TITLE
21:00
25.12
22:00
1
– P1 –
[PROG] : EXIT
[
Y
/
U
] : CURSOR
[
&
] : DELETE
[0-9] : SELECT LETTERS
: OK
25.12
21:00 PR.1
– P1 –
[PROG] : EXIT
[
Y
/
U
] : CURSOR
[
&
] : DELETE
[0-9] : SELECT LETTERS
: OK
25.12 W
HR-S5980AH.5980AJ_EN001B.fm Page 11 Friday, June 6, 2003 4:31 PM
Summary of Contents for HR-S5980AH
Page 27: ... 27 Memo ...