51
Satellite Receiver Multi-
Brand Remote Control
Your remote control can operate the basic functions of your
satellite receiver set. In addition to JVC satellite receivers, other
manufacturer’s satellite receivers can also be controlled.
Before you start . . .
●
Turn on the satellite receiver using its remote control.
●
Set the remote control's VCR/TV/SAT switch to SAT.
SET SATELLITE RECEIVER
BRAND CODE
1
Refer to the chart below. While holding down
on the
recorder's remote control, enter your satellite receiver’s
brand code using the NUMBER keys, then press STOP.
Check if the satellite receiver's power goes off as it
should. If it does, try other operations (
Z
step 2).
●
Once you have set the remote control to operate the
satellite receiver, you don't have to repeat this step
until you replace your remote control's battteries.
●
Some satellite receiver brands have more than one
code. If the satellite receiver does not function with
one code, try entering another.
OPERATE SATELLITE
RECEIVER
2
Press the corresponding button:
, TV PROG +/–,
NUMBER keys.
●
For VIDEOWAY or some other brands of satellite
receiver, you must press
after having pressed the
NUMBER keys.
●
The NUMBER buttons may not function with some
satellite receivers.
●
To return the remote to video recorder control, set its
VCR/TV/SAT switch to VCR.
IMPORTANT
Although the provided remote control unit is compatible with
JVC satellite receivers, as well as many other models, it may not
work with your satellite receiver, or in some instances, may
have limited function capability.
SATELLITE TUNER BRAND
CODE
JVC
72, 73
AMSTRAD
60, 61, 62, 63
BT
72
CANAL +
81
FINLUX
68
GRUNDIG
64, 65
HIRSCHMANN
64
ITT
68
JERROLD
75
KATHREIN
70, 71
LUXOR
68
MASPRO
70
NOKIA
68
PACE
65, 67
PANASONIC
74
PHILIPS
66
RFT
69
SALORA
68
SIEMENS
64
SKYMASTER
69
VIDEOWAY
76
WISI
64
1
2
3
4
5
6
7
8
9
0
2
T
W
4
1
DV
VHS
3
TV PROG+/–
NUMBER
VCR/TV/SAT
STOP
