JVC HD-Z56RX5, Instructions Manual

Page: 11 / 36

Remote control buttons and functions
9
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
To return to a TV channel:
Press the
4
button, the
6
p buttons or the
number buttons.
To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial cable,
choosing the programme number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF channel to the programme
number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on
page 21.
Adjusting the volume
Press the
7
q buttons to adjust the volume.
The volume level indicator appears and the volume changes as you
press the
7
q buttons.
„ Muting the sound
Press the l (muting) button to turn off the sound.
Pressing the
l
(muting) button again restores the previous volume
level.
Display function
You can see the channel number of the programme you are watching
or the PR LIST.
From the PR LIST, you can choose a channel or VIDEO terminal.
Press the
5
button to display the information you
want to see.
Pressing the 5 button changes the display as follows:
Channel number display:
The channel number and channel name (when the channel name is
registered) of the programme you are watching or the VIDEO
terminal number is displayed.
PR LIST:
The programme number (PR) and VIDEO terminal list is displayed.
Pressing the
a
button after choosing the programme number (PR)
or VIDEO terminal with the 7 buttons will display the
chosen programme or VIDEO terminal.
• For programme numbers (PR) for which the CHANNEL GUARD
function is set, the n (CHANNEL GUARD) mark is displayed. For
details see “CHANNEL GUARD” on page 19.
• The VIDEO terminals are registered after the programme number
PR 99.
• For programme numbers (PR) which are registered as a favourite
channel, the
d
(favourite) mark is displayed. For details see
“Favourite channel function” on page 12.
ZOOM function
You can change the screen size according to the picture aspect ratio.
Choose the optimum one from the following ZOOM modes.
• The ZOOM mode is fixed at FULL when you are using the TV as
a PC screen or watching a 1080i or 720p picture signal.
AUTO:
When a WSS (Wide Screen Signalling) signal, which shows the
aspect ratio of the picture, is included in the broadcast signal or the
signal from an external device, the TV automatically changes the
ZOOM mode to 16:9 ZOOM mode or FULL mode according to the
WSS signal.
If a WSS signal is not included, the picture is displayed according to
the ZOOM mode set with the 4:3 AUTO ASPECT function.
• For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO
ASPECT” on page 17.
• When the AUTO (WSS) mode does not function correctly due to
poor WSS signal quality or when you want to change the ZOOM
mode, press the
c
button and change to another ZOOM
mode.
REGULAR:
Use to view a normal picture (4:3 aspect ratio) as this is its original
shape.
PANORAMIC:
This stretches the left and right sides of a normal picture (4:3 aspect
ratio) to fill the screen, without making the picture appear unnatural.
• The top and bottom of the picture are slightly cut off.
14:9 ZOOM:
This zooms up the wide picture (14:9 aspect ratio) to the upper and
lower limits of the screen.
16:9 ZOOM:
This zooms up the wide picture (16:9 aspect ratio) to the full screen.
16:9 ZOOM SUBTITLE:
This zooms up the wide picture (16:9 aspect ratio) with subtitles to
the full screen.
FULL:
This uniformly stretches the left and right sides of a normal picture
(4:3 aspect ratio) to fill the wide TV screen.
• For 16:9 aspect ratio pictures that have been squeezed into a
normal picture (4:3 aspect ratio), use the FULL mode to restore the
picture to its original shape.
PR ID
AV
01
02
03
04
05
06
07
08
09
PR LIST
OK
+10 -10
No indication
Channel number display
HD-Z70&56RX5_Eng.book Page 9 Tuesday, October 11, 2005 9:17 PM