JVC HD-52G566 User Manual Download Page 74 | Manualshive

Page: 74 / 80

background image

74

Warning LED Messages

Appendix

While the power is on, and there is a problem with the TV, the TV changes to warning
mode and informs you of the problem using the LED as follows. Then, the power turns off
automatically and performs the cooling for approximately 90 seconds.

The LAMP LED blinks

Condition:

It may be a malfunction of the internal electrical circuits.

To correct:

Keep the TV off for a while and then turn the power on again. If the TV goes into
warning mode, unplug the TV after the cooling has completed and consult your
dealer.

The POWER LED blinks

Condition:

It may be a malfunction of the internal electrical circuits.

To correct:

Keep the TV off for a while and then turn the power on again. If the TV goes into
warning mode, unplug the TV after the cool down as completed and consult your
dealer.

The POWER LED and LAMP LED blink alternately

Condition:

The inside temperature rises abnormally or the fan may be blocked.

To correct:

Keep the TV off for a while and then turn the power on again. If the TV goes into
warning mode, unplug the TV after the cool down as completed and consult your
dealer.

The POWER LED and LAMP LED blink rapidly simultaneously

Condition:

The lamp unit has been installed on a slant and is not flat, or it is not fully inserted

into the lamp housing. Or it may be a lamp malfunction.

To correct:

• If this condition occurs soon after replacing the lamp: Reinstall the new lamp unit.

Repeat the lamp installation steps, taking care to observe all warnings. Make
sure the lamp sits FLAT inside the unit when you reinstall it.

• If this condition occurs except for replacing the lamp: Keep the TV off for a while

and then turn the power on again. If the TV goes into warning mode, unplug the
TV after the cool down as completed and consult your dealer.

LCT1864-001B-A ENG 74

7/15/05, 12:58:51 PM

«
...
72
73
74
75
76
...
»

Summary of Contents for HD-52G566

















































































Reviews:

No comments

Related manuals for HD-52G566

Brand: Barco Pages: 108

Brand: Barco Pages: 6

Brand: Barco Pages: 143

Brand: Barco Pages: 154

Brand: Barco Pages: 193

Brand: Barco Pages: 85

Brand: Barco Pages: 6

Brand: Samsung Pages: 89

Brand: Samsung Pages: 57

Brand: Nectre Fireplaces Pages: 232

HIGHlite 740 1080p

Brand: Digital Projection Pages: 157

Stories Projector LTC050 Series

Brand: LEXIBOOK Pages: 2

Home Entertainment W100

Brand: BenQ Pages: 47

Brand: Navitar Pages: 18

Brand: Vicom Pages: 37

Brand: BOXLIGHT Pages: 40

Brand: Stumpfl Pages: 10

Brand: BenQ Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands