JVC HD-52G566 User Manual Download Page 72 | Manualshive

Page: 72 / 80

background image

72

Appendix

How to Replace the Lamp

Please read these instructions fully before attempting to replace the lamp. If you feel
unsure about replacing the lamp yourself, call a service technician.

Please observe all

safety warnings.

1) Turn off the television.

Press the POWER button on the remote control or TV front panel. Wait until the picture has
closed and the LAMP LED on the front panel has stopped blinking indicating the lamp cool
down is complete.

Warning: The cool-down process cools the lamp from its operating temperature. This
does not mean that the lamp will now be cool enough to handle safely. We strongly
recommend you wait at least one hour before proceeding.

2) Unplug the television.

Disconnect the power cord from the AC outlet. Make sure that the LAMP LED light has stopped
blinking before you unplug the set. Never attempt to replace the lamp with the television
plugged in.

3) Remove the lamp cover.

The lamp is located behind the lamp cover below the left side of the
television. To access the lamp you will need to remove the lamp
cover. First, loosen the screw located on the lamp cover using your
fingers. If the screw is dif

fi

cult to loosen using your

fi

ngers, loosen

by using a coin. Once the screw has been loosened, gently pull the
knob towards you and the panel will come away from the television.
Set it aside.

WARNING: DO NOT attempt to remove the assembly until the lamp has fully cooled. If you
feel any heat near the lamp, STOP and wait until the lamp has FULLY COOLED.

NEVER attempt to remove the lamp with the television plugged into an outlet.

DO NOT DROP the used lamp. The inside of the lamp is under pressure. Dropping or other
hard shock could cause the lamp to shatter.

ALWAYS recycle the used lamp. Because the lamp contains a small amount of mercury, it
cannot be thrown away with regular trash. Follow the recycling instructions included with the
Lamp Replacement Kit.

4) Remove the lamp unit.

Using a Philips head type screwdriver (cross-head type), loosen the two screws fastening the
lamp unit. When the screws have been loosened, remove the lamp by raising the handle and
gently sliding the unit straight towards you. Place it carefully in the recycling packaging.

LCT1864-001B-A ENG 72

7/15/05, 12:58:50 PM

«
...
70
71
72
73
74
...
»

Summary of Contents for HD-52G566

















































































Reviews:

No comments

Related manuals for HD-52G566

Brand: Valex Pages: 6

Brand: Optoma Pages: 68

Brand: NEC Pages: 2

Christie DS+300

Brand: Christie Pages: 2

Brand: BOXLIGHT Pages: 70

Brand: MKC Pages: 40

Brand: BenQ Pages: 2

Brand: Barco Pages: 112

Brand: NEC Pages: 82

Brand: NEC Pages: 14

PX1005QL Series

Brand: NEC Pages: 12

Brand: NEC Pages: 12

Brand: NEC Pages: 10

Brand: NEC Pages: 11

Brand: NEC Pages: 8

Brand: NEC Pages: 10

Brand: NEC Pages: 6

Brand: NEC Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands