JVC HD-52G456 User Manual Download Page 58

Page: 58 / 88

Button Functions

Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).

Multi Screen Function

Note:

After you press any multiscreen buttons, if you press the menu button, only the picture

adjust screen will appear.

Twin

Activate the split-screen option by pressing T

WIN

the remote control. The channel (or input) you were
watching before pressing T

WIN

will appear on the left,

the new channel will appear on the right. The sound
will continue to come from the main screen channel
(or input). To turn split-screen off and return to
normal television viewing, press T

WIN

again or press

the B

ACK

button.

MAIN SCREEN

PICTURE

V-1

SPLIT SCREEN

PICTURE

Notes:

• If the signal that you are watching is coming from the HDMI input, you cannot enter the

SWAP or INDEX mode.

• Main Screen and Split Screen will not display the same channel or input at the same time.

• Split screen will not display digital channel.

• You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.

• Split-screen functions will not work with locked channels or channels blocked by V-Chip

ratings limits. A gray screen will display instead.

• With split screen, the picture from the component terminal and DIGITAL-IN terminal will

not be displayed.

• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of

480p, 720p and 1080i from the component terminal and DIGITAL-IN terminal.

• After you press the S

ELECT

button, and select SPLIT SCREEN when you press the

OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will
be automatically selected about 8 seconds later.

• Aspect does not work in Twin mode.

• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.

LCT1928-001A-A ENG 58

8/24/05, 10:10:18 AM

Summary of Contents for HD-52G456

























































































Search results

Summary of Contents for HD-52G456

Reviews:

Related manuals for HD-52G456

Brands by name

Popular brands

JVC HD-52G456, User Manual

Search results

Summary of Contents for HD-52G456

Reviews:

Related manuals for HD-52G456

Brands by name

Popular brands