E-71
11. MENU SCREENS
11-5CAMERA OPERATION Menu Screen
The CAMERA OPERATION menu screen is only displayed in the Camera mode.
Item
Function
Variation Range
Initial Setting
SHUTTER
FAW
GAIN L
GAIN M
GAIN H
LOLUX GAIN
SMOOTH
TRANS
SPOT L/
BACK L
ASPECT
RATIO
PAGE BACK
STEP
VARIABLE
NONE
A
B
PRESET
–3dB
0dB
3dB
6dB
9dB
12dB
15dB
18dB
ALC
24dB
24dB+SS
30dB
30dB+SS
36dB
36dB+SS
ON
OFF
LOW
MIDDLE
HIGH
4:3
LETTER
–––––
STEP
NONE
L: 0dB
M: 9dB
H: 18dB
30dB
OFF
MIDDLE
4:3
–––––
The SHUTTER button on the right side section is used to select STEP for
fixed shutter speed or V.SCAN variable scanning rate for shooting computer
monitor screens.
STEP
:Enables setting of different fixed shutter speeds. [1/6.25, 1/
12.5, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/
4000, 1/10000]
VARIABLE :Selected when shooting computer monitor screens, etc.
[Variable range: 50.1 to 2067.8 Hz]
Selects the W.BAL switch (
%
on page 13) position to which the FAW (Full-
Time Auto White Balance Adjustment) function is to be assigned.
NONE
:FAW function is not used.
A
:FAW is assigned to the A position.
B
:FAW is assigned to the B position.
PRESET :FAW is assigned to the PRESET position.
Selects the gain value in each position of the GAIN switch (
#
on page
13).
Sets the gain up value when in the LOLUX mode.
(SS: Shutter speed 1/25)
Smoothens the transition when the GAIN switch (
#
on page 13), or
WHT.BAL switch (
%
on page 13) is switched over and achieves gradual
change in place of sudden change.
However, the smooth transition function does not function when switching
the GAIN switch set in ALC, FAS button and the LOLUX button.
ON :Activates the smooth transition function.
OFF :Deactivates the smooth transition function.
Sets the level of auto iris when setting the AUTO IRIS switch to BACK L or
SPOT L.
LOW
: Lowers the iris level.
MIDDLE : Opens/Closes the iris by 1 step from the standard state.
HIGH
: Raises the iris level.
Sets the image size of the video signal.
4:3
:4:3 aspect ratio image output.
LETTER :LETTER BOX (16:9 aspect ratio) image output.
●
When setting DATE REC in the TIME/DATE menu screen to BARS or
BARS+CAM, the screen size will be fixed at an aspect ratio of 4:3.
●
When ASPECT RATIO is set to LETTER, 16:9 aspect ratio distinction
ID signal is outputted from the Y/C OUT terminal.
The TOP MENU returns when the SHUTTER dial is pressed with the
cursor at this position.
