JVC GVT0150-008A Instructions Manual Download Page 81

Page: 81 / 97

Advanced operations

When Resume Playback is set to “ON” (

pg. 38)

and you stop playback by the following operations,
the position where playback has been stopped is
stored. (“RESUME” appears on the display
window.)
• Turning off the power (

pg. 15)

• Pressing

once

• Changing the source (

pg. 16)

To start playback from the stored position

Press

(play button) or

DVD

• There may be a case where

(play button) does not work after

changing the source.

To clear the stored position

Press

again or open the disc tray with the playback disc.

During playback of a disc containing multi-view

angles

When using the ANGLE button:

Press ANGLE.

Example:
The first view angle is selected out of 3 view angles recorded.

Press ANGLE repeatedly or press
Cursor

to select the desired view

angle.

When using the on-screen bar:

Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

Press Cursor

to highlight

Press ENTER.

Press Cursor

to select the desired

view angle.

Press ENTER.

Press ON SCREEN.

The on-screen bar disappears.

NOTE

• During DVD AUDIO playback, this feature is available only for the

video part.

During playback of a disc containing subtitles in

several languages

When using the SUBTITLE button:

Press SUBTITLE.

Example (DVD VIDEO):
“ENGLISH” is selected out of 3 subtitle languages recorded.

Press Cursor

to select the desired

subtitle.

For DVD VR
• Pressing

SUBTITLE

activates the subtitles (subpictures)

regardless of whether the subtitles are recorded or not.
(subpictures will not change if no subpictures is recorded.)

For SVCD
• An SVCD can contain up to four subtitles. Pressing

SUBTITLE

changes the subtitles regardless of whether the

subtitles are recorded or not. (Subtitles will not change if no
subtitle is recorded.)

NOTE

• To clear the subtitle, press

SUBTITLE

. Each time you press

SUBTITLE

, subtitle appears and disappears alternately.

When using the on-screen bar:

Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

Press Cursor

to highlight

Press ENTER.

Press Cursor

repeatedly to select

the desired subtitle.

Press ENTER.

Press ON SCREEN.

The on-screen bar disappears.

NOTE

• To clear the subtitle, press

SUBTITLE

. Each time you press

SUBTITLE

, subtitle appears and disappears alternately.

• Some subtitle or audio languages are abbreviated in the pop-up

window. See “The language codes list” (

pg. 36).

• During DVD AUDIO playback, this feature is available only for the

video part.

Resume playback

Selecting a view angle

DVD

AUDIO

DVD

VIDEO

DVD

AUDIO

DVD

VIDEO

Dolby D

2/0 . 0ch

Selecting the subtitle

DVD

AUDIO

DVD

VIDEO

Dolby D

2/0 . 0ch

See page 24 for button locations.

TH-C3C6[UJ].book Page 29 Monday, April 4, 2005 6:56 PM

Summary of Contents for GVT0150-008A


































































































Search results

Summary of Contents for GVT0150-008A

Reviews:

Related manuals for GVT0150-008A

Brands by name

Popular brands

JVC GVT0150-008A, Instructions Manual

Search results

Summary of Contents for GVT0150-008A

Reviews:

Related manuals for GVT0150-008A

Brands by name

Popular brands